User manual DOMENA XPRIME 4

[. . . ] The natural disposal of these elements may trigger harmful effects on human health and the environment. It is technically impossible to sort the waste once it is combined. This straightforward and slightly restrictive task of taking part in the recycling of devices that you wish to dispose of is therefore up to you, the consumer. The various packaging items can be recycled. [. . . ] € Wait about 3 minutes for the appliance to be ready, when both the iron and generator heating pilot lights go off. € Once the appliance is ready, press the steam trigger until steam comes out. Please note : Whilst you are ironing, the generator and iron heating pilot lights repeatedly go on and off. This is normal, and you can continue to iron and to use the steam. 1 STEAM FLOW RATE CONTROL KNOB According to model Adjust the flow control knob to suit the type of material being ironed. Gradually steam setting (X’prime 3 - X’prime 4) The volume of steam increases gradually as you turn the control knob towards the maximum. X’prime 4 : At maximum setting, there is an initial burst of steam lasting for several seconds. The steam output will then return to the normal rate. To repeat this process, wait for a few seconds to avoid any risk of spotting. Never call for steam when there is no water in the reservoir. Please note • Because of the high steam output rate, there is no need to continually press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. It also prolongs the life of your anti-scale cartridge. € If the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. There is no risk of the metal being damaged. € Select maximum steam output when : the unit is used for the first time, the water tank has been refilled, the anti-scale cartridge has just been changed. NOISE To ensure regular steam output performance, your unit is equipped with a pump which is activated each time the steam trigger is pressed. It is loudest when there is no water in the system e. : the appliance is used for the first time, the water tank is empty, the anti-scale cartridge has just been changed. During normal use the pump has a gentle humming sound. [. . . ] OFF To produce steam again, either the anti-scale cartridge must be changed or distilled water must be used. After changing the cartridge, the unit must be turned off and on again in order to re c reate normal operating conditions (3 minute wait). ON ANTI-SCALE CARTRIDGE The reference number to order anti-scale cartridges for this irons is 410 057. The anti-scale cartridges are available in blister-pack from your retailer or from your Helpline on 01825 - 768899. [. . . ]