User manual DOMO B3974

[. . . ] Required for R32/R290 Refrigerant only Read all instructions carefully - save this instruction manual for future reference. Dear client , All of our products are always submitted to a strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this. In that case, we kindly request you to contact our customer service. [. . . ] Water that is too hot will break down the yeast before it has a chance to rise. Dough You can only have the machine knead the dough and let it rise with this program. Pizza dough or bread that you want to bake in the oven. Knead You can have the appliance only knead the dough with this program. Cake This program allows you to make bread that is confected with e. The colon will start flashing, which indicates the bread maker has started the process. When you have programmed the time delay function, the program will start after the programmed time delay has expired. When your bread is ready, the machine will beep. Keep the `start/stop' button pressed down for a few seconds. The appliance will beep again to confirm the baking process has been terminated. Disconnect the plug from the power socket and open the lid of the bread maker. Put on oven mitts in order to remove the bread pan from the bread maker. Allow the bread to cool down for approximately 10 minutes. Turn the bread pan upside down above the sink and gently shake it to remove the bread. Should you have difficulty removing the bread from the bread pan, carefully turn the kneading paddle at the bottom of the bread pan until the bread comes loose. Please make sure the bread and the bread pan are never placed on the exterior of the appliance. Nor must they ever be placed directly on a plastic table-cloth. If a kneading paddle should get stuck in the bread, try and remove it as gently as you can. We recommend that you wait 15 to 20 minutes before cutting the bread. Rinse the baking pan with warm water immediately after removing the bread to ensure that the Dough hook does not stick to the axle. Do not start the bread maker if it has not yet cooled down. wARMING FUNCTION In case you should not make it home in time, the bread maker will continue to heat the bread for another 60 minutes. [. . . ] There is a problem with the temperature sensor. Send the device to our after-sales service. This could happen if you always store the device in a cold place (e. The extra ingredients (such as currants or nuts), will be kneaded to pieces and the bread will not be kneaded properly. [. . . ]