User manual DOMO DO9072KR

[. . . ] During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. [. . . ] For a quick start and stop you can turn the knob to P - the pulse function. The knob into the P position to mix and let go of the knob to stop mixing. During preparation you can add ingredients through the fill opening in the lid. You can close off the fill opening with the seperate lid. To switch off the stand mixer, turn the speed control knob to position 0. Turn the nut loose counter clockwise and adjust the height of the accessory to your liking by turning the pins. Then turn the nut clockwise until it's set tight, this to set the height Remove the plug from the socket. Give the unlocking button a quarter turn to unlock the multifunctional head. then Push the head upwards until you hear a click. Push the accessory upwards, out of the locking position and give it a quarter turn clockwise. Slide the accessory out of the slot and remove it from the head. Turn the bowl counterclockwise out of the locking position and remove the bowl. Give another quarter turn to the unlocking button so that the head falls down. Push the head back into the original position until you hear a click. bLENDER Depending on the nature of the ingredients, the blender can mix 1. Make sure that the sealing ring is in place in the blade assembly and lock the Blade assembly onto the bottom of the glass jar by turning it counterclockwise. Place the multifunctional head into its horizontal position and remove the cover Of the connections at the top of the head. Put the ingredients into the jar and close the jar with the lid, including the Measuring cup in the fill opening. Place the blender onto the right connection and lock it by turning it clockwise. During blending you can remove the measuring cup from the fill opening and add Always close the opening afterwards with the measuring cup. caution: · Do not use the blender empty. Never fill the jar with boiling liquids. [. . . ] Be careful, the discs (blades) are sharp. Disassemble the food processor: remove the food pusher, unlock the lid and remove it from the bowl, remove the blade disc and push the axis out of the bottom of the bowl. Clean all parts, except for the axis, in warm water with some washing-up liquid. If necessary, clean the axis with a slightly damp cloth and dry thoroughly. [. . . ]