User manual DRAYTEK VIGOR 2820

[. . . ] Vigor2820 Series ADSL2/2+ Security Firewall User's Guide Version: 2. 1 Date: 2008/10/13 Copyright Information Copyright Declarations Copyright 2008 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Microsoft is a registered trademark of Microsoft Corp. [. . . ] Assume you have a registered domain name from the DDNS provider, say hostname. dyndns. org, and an account with username: test and password: test. In the DDNS setup menu, check Enable Dynamic DNS Setup. Set to Factory Default Index Clear all profiles and recover to factory settings. Click the number below Index to access into the setting page of DDNS setup to set account(s). Enable Dynamic DNS Setup Check this box to enable DDNS function. Vigor2820 Series User's Guide 119 WAN Interface Domain Name Active View Log Force Update 3. Display current WAN interface used for accessing Internet. Display the domain name that you set on the setting page of DDNS setup. Display if this account is active or inactive. Force the router updates its information to DDNS server. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS Account, and choose correct Service Provider: dyndns. org, type the registered hostname: hostname and domain name suffix: dyndns. org in the Domain Name block. The following two blocks should be typed your account Login Name: test and Password: test. Enable Dynamic DNS Account WAN Interface Service Provider Service Type Check this box to enable the current account. If you did check the box, you will see a check mark appeared on the Active column of the previous web page in step 2). Select the WAN interface order to apply settings here. Select the service provider for the DDNS account. Select a service type (Dynamic, Custom or Static). If you choose Custom, you can modify the domain that is chosen in the Domain Name field. Type in one domain name that you applied previously. Use the drop down list to choose the desired domain. Type in the login name that you set for applying domain. Type in the password that you set for applying domain. Domain Name Login Name Password 4. Click OK button to activate the settings. You will see your setting has been saved. The Wildcard and Backup MX features are not supported for all Dynamic DNS providers. You could get more detailed information from their websites. Disable the Function and Clear all Dynamic DNS Accounts 120 Vigor2820 Series User's Guide In the DDNS setup menu, uncheck Enable Dynamic DNS Setup, and push Clear All button to disable the function and clear all accounts from the router. Delete a Dynamic DNS Account In the DDNS setup menu, click the Index number you want to delete and then push Clear All button to delete the account. 3. 8. 2 Schedule The Vigor router has a built-in real time clock which can update itself manually or automatically by means of Network Time Protocols (NTP). As a result, you can not only schedule the router to dialup to the Internet at a specified time, but also restrict Internet access to certain hours so that users can connect to the Internet only during certain hours, say, business hours. [. . . ] Click WAN1 or WAN2 link to review the settings that you configured previously. For PPPoE Users 1. Check if Username and Password are entered with correct values that you got from your ISP. Vigor2820 Series User's Guide 257 For MPoA Users 1. Check if the Enable option is selected. 2. Check if DSL Modem Settings is set appropriately. Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the values from your ISP) if you choose Specify an IP address. 258 Vigor2820 Series User's Guide For Static/Dynamic IP Users 1. [. . . ]