User manual DSC POWER864

[. . . ] WARNING This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. Now classified in accordance with ANSI/SIA CP-01-2000 (SIA-FAR) User's Guide Power864 S E C U R I T Y S Y S T E M ® TM Quick Reference Guide The following chart lists the basic functions of your system alphabetically, and the keys to press for each function. Refer to the listed page number for more information. NOTE: Some functions may not be available on your system. [. . . ] The keypad will display "View Trouble" < > "Trouble Message". Use the keys to scroll through the troubles present on the system. If the keypad shows a "*" beside the trouble message, more information is available. Press to see the rest of the trouble message. Viewing Troubles With a PC55XXZ or LCD5501Z Keypad 1. On PC55XXZ keypads, one or more zone lights will turn ON, to indicate which trouble conditions are present. On the LCD5501Z keypad, one or more of the eight trouble/programming indicators will turn ON: Indicator Type Of Trouble 1 Service required. Call your installation company for service. Press [1] and one or more of the indicators corresponding to the following system troubles will turn ON: 1. PC520X AC Failure 2 3 4 5 AC power lost. The system has failed to communicate with the central station. On PC55XXZ keypads, the zone light(s) corresponding to the zones with faults will turn ON, provided the corresponding zone light is available on the keypad. On LCD5501Z keypads, the keypad display will scroll through the numbers of zones with faults. On PC55XXZ keypads, the zone light(s) corresponding to the tampered zones will turn ON, provided the corresponding zone light is available on the keypad. On LCD5501Z keypads, the keypad display will scroll through the numbers of tampered zones. 6 17 Zone Light 7 Type Of Trouble Low zone battery. This trouble is generated when a wireless device has a low battery. This trouble only applies if you have wireless devices installed on your system. Press [7] one, two, or three times to view which devices are experiencing battery failure. The following will occur: Keypad beeps: Keypad displays: Press [7]1 Zones with low batteries Press [7] again2 Handheld keypads with low batteries Press [7] again3 Wireless keys with low batteries. To set the system time, follow the instructions in "Setting the Time and Date" on page 21. To exit trouble viewing, press Viewing the Event Buffer from an LCD5500Z Keypad The event buffer will show you a list of the last 256 events that have occurred on your system. You must use an LCD5500Z keypad to view the event buffer. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: N Re-orient the receiving antenna. N Increase the separation between the equipment and receiver. N Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. N Consult the dealer or an experienced radio/television technician for help. [. . . ]