User manual DUAL HDM90

[. . . ] Once an HD Radio station is selected, the HD Radio logo will flash in the display for about 5 seconds, indicating that the signal is blending from analog to digital. After the HD Radio signal is received, the HD Radio logo will remain solid in the display, indicating that the tuner is receiving a digital signal. AnalogtoDigitalBlending MulticastChannels After the HD Radio logo remains solid in the display, HD or (seeillustrationbelow) HD1 will illuminate after the radio frequency. · If "HD" appears, the radio station is broadcasting a higher quality sound. · If "HD1" appears, additional multicast channels (HD2 and/or HD3) are available. [. . . ] HDSeekMode HD Seek mode enables the tuner to skip over analog stations and tune to HD Radio stations only. Once enabled, functions such as seek, scan and auto station store will only apply to HD Radio stations. Refer to the instruction manual for your head unit to enable HD Seek mode. · Occasionally, HD Radio multicast channels may be added or deleted. If a preset for a multicast channel is set, and the station is not available, the head unit will revert to the main HD1 radio station. · Functions for the HD Radio tuner mode may vary depending on the head unit model. Refer to the instruction manual for your head unit for specific tuner functions such as tune, seek, scan, presets or auto station store. RecallingMulticastPresets Notes 4 HDM90OPERATION HDRadioTMAM/FMTunerOperation iTunes®Tagging The iTunes Tagging feature of the HDM90 allows the user to "Tag" songs that are playing on HD Radio stations and enables them to be purchased later through iTunes. With the touch of a button the unit will remember the title and artist song information, and then transfer that information to your iPod device the next time you connect it to the head unit. A new list called "Tagged" will appear in iTunes, giving you the option to purchase each song. Refer to the instruction manual for your head unit for detailed operation and iPod device compatibility. hdradio. com/tagging. php for more information. 5 HDM90OPERATION FCCCompliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Please describe your problem in writing and include your name, a return UPS shipping address (P. O. Box not acceptable), and a daytime phone number with your shipment. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: · Call us toll-free at 1-866-382-5476 · E-mail us at cs@dualav. com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company's negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. [. . . ]