User manual DUAL TS

[. . . ] If you feel unsure about installing this system yourself, have it installed by a qualified audio technician. Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury. Do not connect Amplifier or any audio source to illuminite inputs. Inputs are designed for 12 volt power source only. 2 TSSERIESINSTALLATION Installation The following installation instructions are very basic. [. . . ] The interior of your vehicle will never sound or look ordinary again. The lighting features of all illuminite products require a 12 volt DC power source to operate. The speaker has two distinct sets of input terminals. The first is labeled audio input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and -) indicators for each set of inputs also appear on these labels. Do not connect amplifier or any audio source to illuminite lighting inputs. Inputs are designed for switched 12 volt DC power source only. 1a, (illustrated wiring diagram) be sure to maintain polarity. Be sure to connect to a switched 12 volt DC source. Correct connection would be the positive (+) 12 volt wire to the Positive (+) illuminite Lighting input terminal and connect the Negative (-) illuminite lighting input terminal to a good chassis ground. Fig 1a Lighting Hook-Up From Rear 12 Volt Source Audio Input Terminals Illuminite Lighting Input Terminals Audio Source Ground Notice:The illuminite series LED illumination elements are not removable. There are no serviceable parts inside or attached to the speaker assembly. The illuminite series products are sensitive electronic devices. Removal or tampering with any part or portion of the speaker and/or its assemblies will damage the product and void the limited warranty. 4 TSSERIESINSTALLATION Mounting 1. Determine where the speakers will be mounted. Make sure the area is large enough for the speaker to mount evenly. Also ensure the mounting location is deep enough for the speaker to fit. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. If supplied, use the plastic mounting ring as a template to mark the locations for the mounting screws. Be sure to observe proper polarity when connecting the wires. [. . . ] If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. Please describe your problem in writing and include your name, a return UPS shipping address (P. O. Box not acceptable), and a daytime phone number with your shipment. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: Call us toll-free at 1-866-382-5476 E-mail us at cs@dualav. com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company's negligence, actual or imputed. [. . . ]