User manual DUAL XD622W

[. . . ] The XD622W uses one 10 amp ATM fuse located beside the wiring connector. 3 XD622W OPERATION Control Locations 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 Release Power Audio Scan Display Auto Store/Preset Scan EQ Tune/Track Down Eject Tune/Track Up 11 12 13 14 15 16 17 18 19 20 Mode Bass Boost Preset 6 Preset 5 Preset 4 Preset 3/CD Intro Preset 2/CD Random Preset 1/CD Repeat Play/Pause/Band Mute *Semi-permanent Faceplate Attachment For semi-permanent faceplate installation, remove trim ring and install supplied Phillips head #1 screw through left side of mounting frame into faceplate. 4 XD622W OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Press PWR or any other button (except eject) to turn the unit on. Inserting a CD will turn the unit on automatically. [. . . ] or momentarily to seek the next Manual Tuning Press TUNE or for more than 2 seconds, then release. "MANU" will momentarily appear in the display. Press TUNE or momentarily to move radio frequency up or down one step at a time. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in the display. Press SCAN to preview strong stations on the current band, pausing for 5 seconds at each. Press BAND to select between FM1, FM2, FM3 and AM1, AM2 bands. Press and hold BAND then press TUNE to select European frequency spacing. Press and hold BAND then press TUNE to select U. S. Anytime frequency spacing is changed, all station presets are erased. Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button for more than 2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button. Press AS/PS for more than 3 seconds to automatically store the six strongest stations in the current band. Automatic Local/Distance is activated during the initial band scan. Press AS/PS to scan presets 1-6 on the current band, pausing for 5 seconds at each. Press AS/PS again to cancel. Scan Tuning Band Frequency Spacing Storing and Recalling Station Presets Automatically Store Stations Preset Scan 7 XD622W OPERATION Weatherband Tuner Operation Manual Tuning Press TUNE or weatherband station. momentarily to seek the next Direct Tuning Press preset 1~6 or BAND to directly access the 7 weatherband stations. [. . . ] The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Before you call for service, check your operating instructions. A slight adjustment of any custom controls may save you a service call. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with proof of the purchase date from the retailer to the Return Center address listed below. [. . . ]