User manual DUAL XDVD270

[. . . ] Mobile DVD Player with two 7" TFT LCD Monitors OWNER'S MANUAL XDVD270 XDVD270 PREPARATION Table of Contents Page 2 3 4-5 6 7 8 9 10 11 12-14 15-17 18 19 20 21 22 DVD Region Management . Connections - Communication Cable/Power . . DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software products. As this player plays discs according to their intentions, some functions may not work as intended by you. [. . . ] Press or to select Password Setup Page and ENTER to select. Press or to select CHANGE, then create a new password. 14 Default (Restore Factory Settings) Password Setup Page Change Password XDVD270 OPERATION General Operation - DVD Inserting a disc Power On Power Off LCD Monitor On/Off Open lid; insert disc making sure it snaps securely on the spindle mount. Press POWER on the main unit for more than 2 seconds to turn the unit on. When the unit is on, press POWER for more than 2 seconds to turn the unit off. Press LCD on the main unit for more than 2 seconds to turn the LCD monitor on/off. The monitor can be turned off when using the main unit with a TV or other video monitor. The key lock function is used to prevent accidental operation of the main unit buttons while using the unit in a portable environment. Select Key Lock ON/OFF on the left side of the main unit. NOTE: The remote control operation is not affected by the Key Lock function. Playback Start In general, pressing PLAY or ENTER will start disc playback. Some discs will play automatically when the power is turned on. The unit will immediately start rendering the disc program. The unit will return to the startup logo and display "Press Play Key To Continue". If PLAY is pressed, the unit will resume operation from the last position in memory. The unit will return to the start-up logo and display . If PLAY is pressed, the unit will resume operation from the beginning of the disc. Press PAUSE to temporarily stop playback. Press I to skip to the beginning of the next chapter. Press I to return to the beginning of the current chapter. Pressing I again skips to the beginning of the previous chapter. 15 Key Lock On/Off Playback Stop Playback Full Stop Pause Chapter Select XDVD270 OPERATION General Operation - DVD Fast Forward and Reverse Press I or I from the main unit for more than 2 seconds to fast forward or fast reverse in 2x; 4x; 8x; 16x; 32x modes. [. . . ] Unplug the headphones to hear sound from the built-in speakers. A small amount of picture distortion may appear because of a poor quality video/sound transfer to disc. Connect the DVD player directly to the TV and not through any other source. Avoid connecting the unit to a VCR or TV/VCR combination. [. . . ]