User manual DUCATI SUPERBIKE

[. . . ] This is the clutch used by Ducati Corse in Superbike championships, adapted for road use. The anti-slip system can be adjusted thanks to the three sets of interchangable springs which define its intervention index, from soft to hard, based on the required performance. To minimize loads, racing clutch is made of a machined aluminum alloy, and features a loading system with four asymmetrical springs to ensure max grip with fewer elements. Ducati Corse lightweight flywheel; less rotating mass results in lower inertia allowing greater capability to rev up especially from low speeds. [. . . ] Stainless steel 2-1-2 (Ø max 60 mm) intake manifolds unit, complete with control unit with dedicated mapping, and high-performance air filter. Devised to be combined with the set of carbon racing silencers, it can be used also together with titanium type-approved silencers, ensuring a substantial increase of engine performance. Same as standard headlight fairing but with a finer carbon weave which sets off new Superbike family design. Carbon fibre two-seat tail guard available in two colours. It allows a substantial weight loss compared with the standard part, giving a sophisticated and aggressive look to bike rear end. Gear shift lever that converts the standard rider's foot controls into reversed gear change pattern controls. This state-of-the-art shock includes low and high speed compression and rebound damping that are externally adjustable and fully independent. Accessorio non compatibile con il codice 969A05107B Accessory not compatible with part no. Fiberglass road fairing kit with one-piece belly fairing; the kit consists of headlight fairing, side panels and belly pan ( pre-cut for the side stand). Perfect for either track day, or customization use. Light alloy rear sprocket flange with surface anodisation. Fiberglass one piece lower belly pan fairing designed as one-piece for using fairing part no. Rear brake master cylinder with 13 mm diameter piston to increase modulation and braking response. Fiberglass twin-seat tail guard - road version. This complete kit consists of primary gear, hub with clutch drum, clutch housing, plates set, pusher plate and billet aluminium cover. Higher than standard model for an improved rider protection. This anti-slip clutch was developed to express the sporty character of Ducati oil bath engines. It ensures max engine brake control even under the most difficult and demanding gear shift and braking conditions. 20% lighter than standard con-rods, titanium rods are in lower inertia mass and therefore permit faster engine rpm increase. Power shifter with reversed gear change lever. Can be mounted both to standard footpegs and to kits 96644309B and 96625707B. Latest generation of all-in-one electronic finish line sensor, consisting of a very compact GPS module (to be connected to the preset socket on the bike's dashboard). [. . . ] Has always placed great emphasis on safety and encourages its customers to use their motorcycles sensibly and responsibly in compliance with traffic regulations, to always wear a type-approved helmet and adequate protective gear and to make sure their passengers do the same when riding two-up. Accessory realized in cooperation with Ducati Corse. This accessory is not approved for road circulation. The pictures of the catalogue may refer to prototypes, subject to possible changes upon mass production. [. . . ]