User manual DYMO 1755

[. . . ] 25 About Your New Printer With your new RHINO label printer, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different sizes, and styles. The printer uses RHINO Industrial label tape cassettes in widths of 6 mm, 9 mm, 12 mm, 19 mm, or 24 mm. RHINO tape cassettes are also available in a wide range of materials, such as flexible nylon, permanent polyester, vinyl, non-adhesive tag, and heat shrink tubes. [. . . ] Use the arrow keys to select the module number to adjust and press =. Press OK and then Done (ESC) to return to the label. Printing Empty Modules You can choose to print empty modules at the end of Module labels. By default, printing empty modules is turned off. Select Print empty modules and press OK. Select Done (ESC) to return to the label. Any empty modules at the end of a module label will now be printed. Creating Vertical Labels You can choose to print labels with the text running vertically. Labels with multiple lines of text will print as multiple columns of text. Select AUTO to have the length of the label automatically set to fit the text. Press OK to create the label. Using Fuse Multipliers Fuse multipliers allow you to adjust the size of individual fuse modules within a module type label. To adjust the size of an individual module 1. Create a module label as described in Creating Module Labels. Use the arrow keys to find the symbol you want. Press OK to insert the symbol on the label. Inserting User Symbols Custom symbols downloaded from RHINO Connect Software are stored as User symbols. See Using RHINO Connect Software on page 16 for more information. You insert User symbols in the same manner as predefined symbols; however, User symbols cannot be formatted. Use the arrow keys to find the symbol you want. Press OK to insert the symbol on the label. Adding Symbols Your printer includes a set of default symbols to use on your labels. The symbols are separated into several categories: Electrical Voice/Data Audio/Video Warning Punctuation Brackets Arrows Numbers Currency A complete list of the default symbols can be found beginning on page 17. Some of the more popular symbols can be accessed from the number keys using SHIFT plus the number. For example, pressing SHIFT + 1 inserts an open bracket ([). If you transfer a custom set of symbols from the RHINO ConnectTM Software to the printer, an additional set of User symbols becomes available. See Using RHINO Connect Software on page 16 for more information. Using the Text Library Your printer includes a pre-defined text library. [. . . ] Unable to return to the previous menu Nothing shows on the display End of Tape Tape cassette is empty. 20 Problem/Error Message Display text is too light to read Solution · Turn on backlight. · Reduce the number of text lines. · Change the tape width. Too many lines Too many lines for this tape width. Barcode not allowed Barcodes can only be printed on 19 mm and 24 mm tape. Printing Self-Lam label not allowed · Replace the tape cassette. [. . . ]