User manual DYMO RHINO 5200

[. . . ] User Guide Contents About Your New Printer . 6 Inserting and Removing the Label Cartridge . 14 Printing Separator Lines Between Cells . 14 Positioning Human-Readable Barcode Text . [. . . ] Use the up or down arrow key to move from row to row. To create data for the blocks automatically, see Creating a Series of Labels on page 15. To print separator lines between the blocks, see Printing Separator Lines Between Cells on page 14. Creating Block Labels You can create two types of block labels: Terminal Block and 110-Block labels. Creating Terminal Block Labels A Terminal Block label is very similar to a Patch Panel label; however, the text is printed vertically for each block. Enter or select the number of blocks and press . 12 Creating Module Labels A Module label allows you to label a row of fuses of varying widths. You set the width of a fuse and the number of fuses, enter the text for each fuse, and print. You can use fuse multipliers to adjust the width of individual modules as necessary. Enter or select the fuse length and press . Select the length that applies to the smallest size fuse in the module. You can then use fuse multipliers to increase the size of any individual modules that are larger. Enter or select the number of modules and press . Enter the fuse multiplier for each module and press . Each fuse is separated by a solid black line on the display. Use the left or right arrow key to move from module to module. To adjust the fuse multipliers after a label has been created, see Using Fuse Multipliers. To create the data for the modules automatically, see Creating a Series of Labels on page 15. Printing Empty Modules By default, empty modules at the end of a Module label are not printed. You can choose whether or not to print empty modules at the end of a label. Select Done (OK) to return to the label. Any empty modules at the end of a Module label will now be printed. Creating Vertical Labels You can choose to print labels with the text running vertically. Labels with multiple lines of text will print as multiple columns of text. Enter or select a length for the label and press . Select AUTO to have the length of the label automatically set to fit the text. Changing the Label Type Once you create a label using one label type, you can easily change the label type without losing your data. If the data from one label type will not fit in the new label type, the text that will not fit is shaded in the display. [. . . ] No response when pressing keys One of the keys may be jammed. How do I remove the backing from the label? If you still need assistance, visit the DYMO Web site at www. dymo. com. 20 Safety Precautions for Lithium-Ion Rechargeable Battery Pack Inaccurate handling of a Lithium-ion rechargeable battery may cause leakage, heat, smoke, an explosion, or fire. This could cause deterioration of performance or failure. This may also damage the protection device installed in the battery pack. [. . . ]