User manual DYNACORD MADRAS M18

[. . . ] Use only with the cart, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for a long period of time. refer all servicing to qualified service personnel. [. . . ] The minimum distance between parts carrying mains voltage and any switches or breakers that are not connected to the mains (secondary parts) has to be 6 mm and needs to be minded at all times. Replacing special components that are marked in the circuit diagram using the security symbol (Note) is only permissible when using original parts. Altering the circuitry without prior consent or advice is not legitimate. Any work security regulations that are applicable at the location where the appliance is being serviced have to be strictly obeyed. This applies also to any regulations about the work place itself. The integrated controller with 124 Hz, 24dB/octave and Linkwitz-Riley characteristics and the electronically balanced XLRF-type connectors allow easy installing an active 3-way system configuration using active top-parts like for example the MADRAS M18 (in mid-high position). frequency and phase responses of the MADRAS M18 also provide the possibility for direct parallel operation with suitable full-range cabinets. Achieving this is possible by simply feeding the MADRAS M18 Sub with a line level audio signal from a separate mixer output. Balance between MADRAS M18 Sub and top-parts can be established from the mixing console. an 800W high-efficiency class-H power amplifier provides ample power. Consequential use of class-H technology reduces power dissipation, power consumption as well as the power amp's weight noticeably. The power amplifier is convection-cooled, resulting in no disturbing noise from running fans. The fully electronic VOICE COIL TRACKING PROTECTION prevents the EVX180B woofer from being damaged by thermal overload, which make the MADRAS M18 especially suitable for a wide range of demanding applications in the rental business. Four stable carrying handles as well as four professional-type castors allow for comfortable transport. Snap-in drillings allow trouble-free, stables stacking while an integrated polemount flange permits space-saving installation with top-parts. Open the packaging and carefully take out the MADRAS M18. In addition to the appliance itself and this owner's manual, the package also includes mains cord, level control cover and warranty certificate. Please make sure to keep warranty certificate and original invoice, stating the date of purchase, at a safe place. [. . . ] This is normal, indicating that all protections are working. pOWER-switch Mains switch for powering the appliance on or off. With the power amplifier being switched on, the mains switch is backlit. If, after switching the power on, the switch is not backlit, please first check whether the mains cord is correctly connected. [. . . ]