User manual DYNACORD POWERSUB 112

[. . . ] Use only with the cart, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for a long period of time. refer all servicing to qualified service personnel. [. . . ] the signal polarity can also be switched if necessary. PowerSub 212 The PowerSub 212 is a very compact 2 x 12" subwoofer with an integrated 2 x 200 W RMS or 2 x 400 W Maximum Amplifier Output Capability class D technology amplifier module. The integrated stereo crossover means it`s simple to build an active 3-way system with mono subwoofer and active fullrange speakers. The PowerSub 212 is perfectly matched with the D 8A or the D 11A and delivers the lowest bass at the highest sound pressure levels. As with the PowerSub 112 the sound is always clean, with no distortion, even for the most demanding applications. four castors allow easy transportation and handling. The only person who can claim damages in transit. Keep the cardboard box and all packaging materials for inspection by the transport company. Keeping the cardboard box including all packing materials is also recommended, if the cabinet shows no external damages. CAUTION: Do not ship the cabinet in any other than its original packaging. Keep the original invoice that states the purchase/delivery date together with the warranty certificate at a safe place. The manufacturer`s warranty covers all substantial defects in materials and workmanship for a period of 36 months from the date of purchase. Liability claims are accepted solely, when a valid - correctly and completely filled out Warranty Registration Form is presented by the original owner of the product. The warranty does not cover damage that results from improper or inadequate treatment or maintenance. Carefully open the packaging and take out the cabinet. Inspect the cabinet's enclosure for damages that might have occured during transportation. Each cabinet is examined and tested in detail before leaving the manufacturing site to ensure that it arrives in perfect condition at your place. Please inform the transport company immediately if the cabinet shows any damage. Being the addressee, you are HINT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] This Quick Start Manual outlines setup and operation of the PowerSub 212 being used as subwoofer satellit system connected to a DYNACORD CMS mixer. The height of the speakers should be set so they are above the heads of the audience. This ensures that sound levels at the front are not too high, while still achieving sufficient intelligibility at the back. Place the PowerSub 212 in the area between the satellite speakers and, using suitable XLR-type cables, connect the satellites to MID/HIGH OUT L or MID/ HIGH OUT R on the rear panel of the PowerSub 212. [. . . ]