User manual DYNACORD POWERSUB 315 REV 11-2010

[. . . ] Use only with the cart, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for a long period of time. refer all servicing to qualified service personnel. [. . . ] While using DYNACORD D 12 12" 2-way systems as satellite cabinets is recommended, the PowerSub 315's switch able integrated active crossover allows matching the PowerSub 315 to smaller or bigger satellite systems (e. Power amp output capacity is automatically distributed to the connected speaker systems when switching between operation modes using the , MODE` switch on the rear of the appliance. Four castors, two carrying handles and an integrated pole-mount stand flange facilitate transport and set-up of center subwoofer and stereo satellite systems. Next to the PowerSub itself, the package also includes this owner's manual, a mains cord and the warranty certificate. make sure that all information on the warranty certificate is correctly filled in. Only a completed warranty certificate entitles you to file any claims. Keep the original invoice, which states the purchase/delivery date together with the warranty certificate at a safe place. Installation and Connection Install the PowerSub 315 with its rubber stands on an even ground to ensure stable and secure operation. For applications with pole-mounts inserted in the PowerSub 315, inspect the stability of the entire system and use additional ropes to secure the cabinets from falling over. Do not cover the rear panel during operation. Otherwise, because of thermal overload, the PowerSub 315 may enter reduced power mode, which protects the PowerSub from being damaged while on the hand full output power is not available. mains connection is provided via Neutrik's professional "PowerCon" connector system and an extra long (5m) , highly flexible mains cord offering absolute safe operation. With bigger system set-ups consisting of several active cabinets, the use of quality mains distribution hardware throughout the entire installation, being appropriate to handle total power consumption and providing sufficient fuse protection, is absolutely mandatory. Before establishing mains connection for the first time or after changing locations, make sure to examine the mains voltage label to ensure that the power specifications of the local mains match those of the PowerSub 315. Caution: After system installation is complete, make sure to first power on the mixing console and to position the master faders at their lowest setting before switching the power of the PowerSub 315 to On. use the output faders to establish the desired volume setting. Otherwise, switching and power-on noise or the high level audio signal of an inadvertently playing audio source could result in high acoustic outputs, that in some cases might even lead to hearing damage. This quick-start manual explains installation and operation of a PowerSub 315 subwoofer satellite system used together with a DYNACORD CMS 1000 or CMS 1600 mixer (see `installation examples' on page 19-20). DYNACORD D 12) on the left and right hand side on pole-mount stands with the lower edges of the speaker systems being approx. In this way you will gain longer throw and the listeners in the front rows are safe from high acoustic level peaks. Place the PowerSub 315 somewhere in the middle between the satellite speakers and connect the satellite speakers to `LEFT SATELLITE SPEAKER OUTPUT' and `RIGHT SATELLITE SPEAKER OUTPUT' on the rear of the PowerSub 315 using suitable SPEAKON speaker cables. Position the mixer's master faders at their lowest setting and afterwards power on the mixer. [. . . ] When employing top cabinets with 15" speakers, the 80Hz position mostly provides improved sound. SUB LEVEL This control sets the volume of the PowerSub 315 in a setting range between -dB to +10dB, while 0dB marks the center position. Always adjust the PowerSub 315's output level as precise as possible and use the mixer's bass controls for minor sound corrections only. Each output provides a power capacity of up to 500W into 4 ohms, offering the possibility of connecting up to two 8 ohms satellite speaker systems (e. [. . . ]