User manual DYNACORD VECTOR SERIES DATASHEET

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or orbjects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. [. . . ] Due to line current harmonics, we recommend that you contact your supply authority before connection. With buying a Dynacord PowerSub 315 you have chosen a state-of-the-art active subwoofer that employs most advanced technology. The active 15" subwoofer PowerSub 315 with four integrated digital power amps provides total output power of 2000W and has been designed for the quick and easy set-up of subwoofer satellite systems. Subwoofer satellite systems normally employ a center woofer system and satellite cabinets on the left and right sides. DYNACORD's PowerSub 315 provides an additional output for the connection of external subwoofers, for it to be equally used in active stereo applications employing up to two additional external subwoofers. While using DYNACORD D 12 12" 2-way systems as satellite cabinets is recommended, the PowerSub 315's switch able integrated active crossover allows matching the PowerSub 315 to smaller or bigger satellite systems (e. Power amp output capacity is automatically distributed to the connected speaker systems when switching between operation modes using the , MODE` switch on the rear of the appliance. Four castors, two carrying handles and an integrated pole-mount stand flange facilitate transport and set-up of center subwoofer and stereo satellite systems. Next to the PowerSub itself, the package also includes this owner's manual, a mains cord and the warranty certificate. make sure that all information on the warranty certificate is correctly filled in. Only a completed warranty certificate entitles you to file any claims. However, the output sound is noticeably degraded. Slowly and carefully increase the volume using the mixer's channel faders and master faders. The `SUB LEVEL` control on the PowerSub 315 lets you adjust the sound balance between bass and mid-tone range. Use a CD player or tape deck connected to the `LINE` inputs or `2TRACK RET` RCAtype connectors of the CMS 1000 mixer for making tone control adjustments. Use the tone controls in the mixer's input channels for making individual corrections to the sound. The controls in the input channels are generally meant for moderate corrections only. If extreme changes in the bass range are necessary, use the `SUB LEVEL` control on the PowerSub 315. extreme settings in the input channels mostly indicate that the `SUB LEVEL` setting of the PowerSub 315 is not optimal. Have fun using your PowerSub 315 satellite system!To power off the system please proceed as follows: first switch off the PowerSub 315 and then the mixer. this avoids interfering power-off noise. [. . . ] Compared to the `INTERNAL SUB ONLY` setting and despite the fact of poweroutput distribution, this setting provides a little bit higher overall SPL because of the increase in the total diaphragm surface and the lower mechanical excursion of each diaphragm. If, after power on, the switch does not light, make sure the mains cord is correctly plugged in and locked in place. If the cord is correctly connected and operation is still not possible, contact your dealer. When inserting the PowerCon-type plug into the socket, the plug has to be locked in place by a quarter-turn in clockwise direction. [. . . ]