User manual DYNACORD VL 62W DATASHEET

[. . . ] Cabinet Configuration Nominal impedance Rated power RMS Program power Peak power SPL 1W / 1m 4V / 16Ohm Max. SPL 1m (calculated with peak power) Frequency range ( -10dB ) Full range Frequency range ( -10dB ) measured with H5000-RCM26 preset Coverage angle nominal Passive crossover frequency Voice coil tracking protection Component HIGH Order No. [. . . ] With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. for the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e. The VL62 can be used as a general purpose stand-alone fullrange cabinet and as satellite or delayed system cabinet in larger set ups. Professional halogen protectors and thermal circuit breakers protect the components against short-term thermal overload. the protection circuitry exhibits `soft' switching characteristics , so no annoying clicks or pops are audible. The circuitry resets automatically after the voice coil temperature has reached a safe value. [. . . ] Two metric M10 inserts on top and bottom of the cabinet can carry the MB 62 mounting bracket. Four metric M6 inserts on the rear side can be used for the WMK 10 Wall mount kit or customary ball-and-socket-joint wall mount accessories. [. . . ]