Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DYNASTY SPAS NEPTUNE. We hope that this DYNASTY SPAS NEPTUNE user guide will be useful to you.
Lastmanuals help download the user guide DYNASTY SPAS NEPTUNE.
Detailed instructions for use are in the User's Guide.
[. . . ] The "Pump 1" indicator lights up when Pump 1 is on at high speed. It flashes when Pump 1 is on at low speed.
Turning the light on:
Neptune Series Spas feature an easy-to-change selection of nine different LED color/display settings. To activate the LED lights, press the "LIGHT" button on the topside panel one time. [. . . ] Setting#7 LED's light up and remain on in Red. Setting#8 LED's light up for 2 sec, flash off, then flash on in the next color, until all six colors have been displayed. The flashing cycle then restarts at the beginning and repeats. Setting#9 LED's flash on/off quickly, for a strobe light effect. The LED lights will automatically turn themselves off after 2 hours in any one setting.
Starting Pump 2:
Press Pump 2 to turn Pump 2 on. A built-in timer automatically turns pump off after 20 minutes, unless pump has been manually deactivated. The "Pump 2" indicator lights up when Pump 2 is on.
Setting water temperature:
Use Up or Down arrow keys to regulate water temperature. The temperature setting will be displayed for 5 seconds to confirm your new selection. The "Set Point" indicator displays the desired temperature, NOT the current water temperature!Water temperature can be adjusted by 1° increments from 59 to 104°F (15 to 40°C).
Automatic water heater start:
When water temperature is 1°F (0. 5°C) lower than the Set Point, the heater will automatically turn on until water temperature reaches Set Point plus 1°F (0. 5°C). The "Heater" indicator lights up when the heater is on. It flashes when there is a request for more heat but the heater has not yet started. N. B. : If your system is configured in Low Current Mode, the heater will not start if a pump is on at high speed.
Temperature display unit:
Press and hold Light key for 5 seconds to display water temperature in either Fahrenheit (°F) or Celsius (°C). If a power-up occurs, system returns to default setting (°F).
Economy mode:
Press Econo key to switch from Normal mode to Economy mode. In Economy mode, system maintains temperature at the desired Set Point during filter cycles only. Set Point is 20°F (11°C) below the Normal mode Set Point for the rest of the time. [. . . ] Call your dealer or service supplier if problem persists. Water temperature in the spa has reached 112 °F (44°C).
3 flashing dots are displayed.
Do not enter the water!The system will reset automatically when water temperature reaches 109 °F (43°C). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DYNASTY SPAS NEPTUNE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DYNASTY SPAS NEPTUNE will begin.
