Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DYNASTY SPAS RECREATIONAL. We hope that this DYNASTY SPAS RECREATIONAL user guide will be useful to you.
Lastmanuals help download the user guide DYNASTY SPAS RECREATIONAL.
Manual abstract: user guide DYNASTY SPAS RECREATIONAL
Detailed instructions for use are in the User's Guide.
[. . . ] A built-in timer will shut the pump off after 20 minutes unless it has been manually deactivated. The "Pump" indicator light will be on when the Pump is running.
"Pump" indicator light
To turn the light on:
Press the Light key to turn the light on. [. . . ] A built-in timer will shut the light off after 2 hours unless it has been manually deactivated. The "Light" indicator will be on when the light is on.
"Light" indicator
To change the water temperature:
Press the Up or Down arrow key to increase or decrease the desired water temperature. The selected temperature setting will be displayed for 5 seconds as a confirmation. The "Set Point" indicator light indicates that the temperature shown is the desired, and not the current, temperature of the water!The temperature can be adjusted in 1-degree increments from 59 to 104°F (15 to 40°C).
"Heater" & "Set Point" indicator lights
Water heater automatic start:
When the water temperature is 1°F (0. 5°C) lower than the set point, the heater will be turned on automatically until the water temperature reaches the set point plus 1°F (0. 5°C). In this case, the first filter cycle will start 12 hours after power has been restored.
TROUBLESHOOTING
Pumps have started up for one minute on several occasions and "Filter Cycle" indicator is flashing. Our Smart Winter Mode protects your spa from the cold by automatically turning pumps on for one minute several times a day to prevent water from freezing in pipes. Shut power off and power your spa up again to reset the system. Call your dealer or service supplier if problem persists. Water temperature in the spa has reached 112°F (44°C). [. . . ] Water temperature in the spa has reached 112°F (44°C). The system will reset automatically when water temperature reaches 109°F (43°C). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DYNASTY SPAS RECREATIONAL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DYNASTY SPAS RECREATIONAL will begin.
