User manual DYSON DC02

[. . . ] the motor makes no sound stated time, or if blockages are not cleared immediately. when switched on) then please check your DC02 for blockages as detailed If the vacuum cleaner suddenly stopsalso to check the fuse in the plug). the motor makes no sound when switched on) then please check your cleaner for blockages as Important safety instructions ­ please read before use WHEN USING THE DYSON DCO2 VACUUM CLEANER PLEASE ADHERE TO THESE SIMPLE PRECAUTIONS. B Y D O I N G S O Y O U W I L L R E D U C E T H E R I S K O F F I R E , E L E C T R I C A L S H O C K O R I N J U R Y. 1. [. . . ] If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed/safely disposed of. Warning: Under no circumstances should the severed plug be inserted into a 13A socket, serious danger of electric shock would result from the exposed wires. The mains lead can then be shortened to the minimum required length, suitably prepared and the correct style of plug to suit your household wiring system should be fitted. The following wiring instructions should be followed. If in doubt, consult a qualified electrician. Unwanted products and the environment Should you find that your product needs replacing one day, or is of no further use to you, think of protecting the environment. Dyson will accept your old products and recycle them in an environmentally friendly way. IMPORTANT The wires in the mains lead are coloured in accordance with the following codes. 2. Brown ­ Live Blue ­ Neutral As the colours of the wires in the mains lead may not correspond with the colours or markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black. The wire that is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red. Neither wire should be connected to the earth terminal of a three pin plug which is marked with the letter E or or coloured Green or Green and Yellow. Always ensure that the cable clamp is fitted and that it clamps the cable outer and NOT the coloured wires. If the supply cord of the appliance is damaged, disconnect the appliance from the socket outlet immediately. The supply cord must be replaced and only by Dyson Appliances Ltd. or their appointed agent as special purpose tools and service techniques are required. 9. 3. 10. Do not use the cleaner to pick up flammable or combustible substances or hot ashes or burning objects of any kind. Do not work below the cleaner on the stairs. Do not immerse the whole cleaner in water for cleaning. [. . . ] Clear any blockage with rod or wire. 4 Wrap a plastic bag tightly around the rim of the clear bin. 5 Invert clear bin and wait at least 10 seconds before releasing. Remove floor tool from 4 wand and check for blockage. 6 Wipe shroud holes free of all dust/debris. 7 Do not use strong detergents and ensure clear bin is fully dry before replacing in machine. Note: The yellow bin inner should not be removed from the bin when it is cleaned. [. . . ]