User manual DYSON DC02 ABSOLUTE

[. . . ] Check wand handle swivel 2 by pressing yellow buttons and pulling hose from wand. Clear any debris. On/off switch Press left switch. Tool storage Press yellow release catch to open the tool storage cover and insert required tool into end of wand or wand handle. Please note that tools may feel warm when machine has been running; this is perfectly normal. Self adjusting Floor tool Fit floor tool by pushing firmly into end of wand. 3. Check wand joint 3 by pulling wand and wand handle apart. [. . . ] the motor makes no sound stated time, or if blockages are not cleared immediately. when switched on) then please check your DC02 for blockages as detailed If the vacuum cleaner suddenly stopsalso to check the fuse in the plug). the motor makes no sound when switched on) then please check your cleaner for blockages as Important safety instructions – please read before use WHEN USING THE DYSON DCO2 VACUUM CLEANER PLEASE ADHERE TO THESE SIMPLE PRECAUTIONS. B Y D O I N G S O Y O U W I L L R E D U C E T H E R I S K O F F I R E , E L E C T R I C A L S H O C K O R I N J U R Y. 1. Do not leave your Dyson cleaner with the plug connected to a mains outlet – unplug when not in use. Turn the cleaner off with the switch button before removing from the mains outlet. Always remove the plug from a mains outlet before carrying out any maintenance. Do not carry out any maintenance work on the cleaner other than that outlined in this manual, especially where electrical components are concerned. Do not use without the clear bin assembly fitted correctly and both filters in place. Do not fit anything other than Dyson spare parts (available on the Helpline on 1800 239 766). Use of non-Dyson parts could invalidate your guarantee. Do not continue to use the cleaner if any part appears to be faulty, missing or damaged. In these cases, contact the Dyson Helpline on 1800 239 766. Do not put any part of the body, clothes or any object near or into the openings or moving parts of the machine. Do not use the machine with any of the openings blocked with any object that may restrict the airflow. Do not pull on the supply cord, run over it or pull it around sharp edges or near/over hot surfaces. Do not handle the cleaner or plug with wet hands. Do not use the cleaner if the cord or plug are damaged or if the cleaner has been damaged, dropped or has come into contact with water or any other liquid. Do not use the cleaner to pick up water or any other liquid. Electrical shocks could occur if used outdoors or on wet surfaces. IMPORTANT A LWAY S U N P L U G T H E VAC U U M C L E A N E R F R O M T H E WA L L S O C K E T B E F O R E I N S P E C T I N G I T NOTE Check that your supply corresponds to that shown on the rating plate. The appliance must only be used as rated, it should be fitted with an ASTA approved fuse to BS1362. European conformity information A sample of this product has been tested and found to be in conformity with the following European Directives: 73/23/EEC Low voltage (safety) Directive, 93/68/EEC CE Marketing Directive and 89/336/EEC EMC Directive. For your convenience this appliance is supplied with a plug which is fitted with a 13amp fuse of the appropriate rating. [. . . ] or their appointed agent as special purpose tools and service techniques are required. 9. 3. 10. Do not use the cleaner to pick up flammable or combustible substances or hot ashes or burning objects of any kind. Do not work below the cleaner on the stairs. Do not immerse the whole cleaner in water for cleaning. [. . . ]