User manual DYSON DC03I

[. . . ] Your serial number can be found on the rating plate, which is situated on the base of the machine between the wheels. Most queries can be solved over the phone by one of our trained Helpline staff. Note your serial number for future reference: DCO3 1 Assembling your Dyson Small details may vary slightly from those shown Safety information Important safety information Take care to ensure objects or body parts are not inserted into the cleaner head 1. [. . . ] Do not carry out any maintenance work other than that shown in this manual or advised by the Helpline, and do not put anything into the openings or moving parts of the machine. US 4593429, US 4853011, US 4826515, US 5078761, US 5160356, US 5558697, US 5853440, US 5893936, CA 1182613, CA 1241158, CA 2056161, AU 637272, AU 669539, AU 691710, AU 697029, EP 0042723, EP 0489565, EP 0636338, EP 0647114, EP 0800359, EP 0800360, EP 0799094, WO 94/00046, WO 96/19936, WO 96/19937, WO 98/02080, WO 99/27834, WO 99/29223, WO 99/49978, WO 00/21424, WO 00/21425, WO 00/21427, WO 00/04816, GB 2341907, GB 2342282, GB 2342283, Design Registrations: GB 2076926, GB 2074319. Design Applications: GB 2091328. Press button to insert wand. 9. Only use parts recommended by Dyson; failure to do so could invalidate your guarantee. If you have a query about your Dyson, call the Dyson Helpline with your serial number, which can be found on the rating plate underneath the machine. 1 2 PROG(CR): 01 PROG(BO): 01 For hardfloors/delicate rugs Brush control Ensure the machine is fully upright before adjusting the setting. 4. If the supply cable or the cleaner is damaged, disconnect from the socket immediately. The cable must be replaced by Dyson Ltd or our appointed agent to avoid a hazard. DATE: 09. 0. 05 For your safety STUDIO: PB For carpets/non-delicate flooring Important information · · Ensure the wand cap cover is closed. Ensure hose is straight when inserting wand into hose. Important information JN NAME: DCO3i OP MANUAL JN. 12266 - PN03452-05-01 09. 03. 05 Please note: this machine is intended for domestic use only. Fine dust such as plaster dust or flour should only be vacuumed in very small amounts. Do not press the cyclone release button while carrying the machine or it could fall and cause injury. Ensure the cyclone is secured to the machine Do not shake the machine while carrying or it could fall and cause injury. Keep hair and loose fabrics away from wand cap when machine is on. Do not use cleaner above you on the stairs. Do not use cleaner near naked flames. Do not leave cleaner near heat sources. Do not pull on cable. Do not run over cable. Do not use cleaner to pick up water or any other liquid. Do not place hands near brushbar when in use. Do not use cleaner to pick up burning objects of any kind. JN: 12266 www. dyson. com 12266_DC03i_OP_MANUAL. qxd p1-2 5/31/05 10:15 AM Page 2 3 Important information Ensure machine is in upright position before using tools. Using tools Ensure hair and loose clothing are kept clear of wand cap when machine is switched on. Ensure wand cap is closed, unless using with tools. Always work with the machine at the bottom of the stairs 5 1 Emptying the clear bin TM Empty bin as soon as the MAX mark is reached Optional You can rinse the bin with cold water. Dry completely before replacing. Important information Turn power off and unplug before emptying the bin. 2 Do not use the machine without the clear bin in place. TM Or 1 2 Do not use detergents, polishes or freshening products. [. . . ] Refit all parts of the machine securely before using it. Finding and clearing blockages 6 Washing your filter hours Important information Check airways and clear any obstruction Turn power off and unplug before washing the filter. Check your filter regularly and wash at least every six months. The filter may require more frequent washing if vacuuming fine dust. [. . . ]