User manual DYSON DC28

[. . . ] Wash filters with cold water at least every 3 months. 3 easy ways to register your 5 year warranty. REAd All INSTRUCTIONS bEFORE USINg ThIS vACUUM When using an electrical appliance, basic precautions should always be followed, including the following: Do not leave the vacuum when plugged in. Unplug from outlet when not in use and before servicing. [. . . ] Consult your flooring manufacturer's recommended instructions before vacuuming and caring for your flooring, rugs, and carpet. Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming in bare floors mode and consulting with your flooring manufacturer. When vacuuming, certain carpets may generate small static charges in the clear binTM. These are entirely harmless and are not associated with the mains supply. To minimize any effect from this, do not put you hand or insert any object into the clear binTM unless you have first emptied it and rinsed it out with cold water (see `Clear binTM cleaning' section). PLEASE NOTE: If you continue to experience problems, please contact the Dyson helpline for further assistance. Refit all parts of the vacuum securely before using. The vacuum will always default to the `Med pile' setting when it is switched on and reclined. To change floor settings, press the button which best describes the floor type you are vacuuming whilst the vacuum is switched on. To vacuum with the brush bar turned off (eg. Clearing blockages is not covered by your vacuum's limited warranty. This vacuum is fitted with a thermal cut-out. If any part of the vacuum becomes blocked, it may overheat and automatically cut-out. Switch `OFF' and unplug the vacuum and leave to cool down for at least 60 minutes before checking filters or for blockages. Check for obstructions along the length of the brush bar and around the end mountings. Refit all parts of the vacuum securely before using. Always follow your floor covering manufacturer's recommended instructions. The brush bar on this vacuum can damage certain carpet types. If unsure, turn brush bar off in order to ensure proper operation. Clearing brush bar obstructions is not covered by your vacuum's limited warranty. Powerful suction can cause the hose to `pull back' ­ please take care. [. . . ] Please fill out and return the Warranty Form, or register online at www. Before service can take place, the terms of the limited warranty require that you contact the Dyson Helpline with your model name/number, serial number, date and place of purchase. Please keep your purchase receipt in a safe place to ensure you have this information. The serial number is found on the vacuum's rating plate, which is behind the clear binTM. [. . . ]