User manual DYSON DC33C ALLERGY PARQUET

[. . . ] Note your serial number for future reference. EN IMPORTANT SAFETY INSTRUCTIONS FR/BE/CH BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE When using an electrical appliance, basic precautions should always be followed, including the following: SERVICE CONSOMMATEURS DYSON MERCI D’AVOIR CHOISI UN APPAREIL DYSON Garantie 5 ans pièces et main-d’œuvre incluses à compter de la date d’achat, selon les conditions générales. WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: This Dyson appliance is not intended for use by young children or infirm persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person concerning use of the appliance to ensure that they can use it safely. Close attention is necessary when used by or near children. [. . . ] Switch ‘OFF’ and unplug before checking or removing the filter. The filter may require more frequent washing if vacuuming fine dust. Hold under a tap and run water through the open end until the water runs clear. Squeeze and twist with both hands to make sure the excess water is removed. Run water over the outside of the filter for 15 seconds. Squeeze and twist with both hands to make sure the excess water is removed. Place the filter on its side to dry completely. Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave or near a naked flame. IMPORTANT: After washing please leave at least 24 hours to dry completely before refitting. bLOCKAGES – THERMAL CUT-OUT This appliance is fitted with an automatically resetting thermal cut-out. If any part becomes blocked the appliance may overheat and automatically cut-out. If this happens, wipe with a damp cloth, polish the area with wax, and wait for it to dry. To reduce suction (for example, when vacuuming rugs), pull the suction release trigger on the handle to reduce the airflow. Looking for blockages • • • • • • • • • • Switch ‘OFF’ and unplug before looking for blockages. failure to do so could result in personal injury. Leave to cool down for 1-2 hours before looking for blockages. Beware of sharp objects when checking for blockages. failure to do so could result in personal injury. Unscrew the two Phillips screws on the clear bin locator bracket. Firmly twist the flexible inspection hose away from the inlet next to the ball (do not remove the end next to the connection for the main hose). Clearing blockages is not covered by your guarantee. € • • • • • • DISPOSAL INFORMATION • Dyson products are made from high grade recyclable materials. [. . . ] Do not put the clear bin in a dishwasher. Do not immerse the whole cyclone in water or pour water into the cyclones. Clean the cyclone shroud with a cloth or dry brush to remove lint and dust. Ensure the clear bin is completely dry before replacing. [. . . ]