User manual E-MU E4K

[. . . ] Emulator Four Keyboard Sampling Synthesis Controller Operation Manual © 1995 E-mu Systems, Inc. B IMPORTANT NOTICE: IN ORDER TO OBTAIN WARRANTY SERVICE ON YOUR E4K UNIT, THE SERIAL NUMBER STICKER MUST BE INTACT AND YOU MUST HAVE A SALES RECEIPT OR OTHER PROOF OF PURCHASE. IF THERE IS NO SERIAL NUMBER STICKER ON THE E4K, PLEASE CONTACT E-MU SYSTEMS AT ONCE. E-MU WORLD HEADQUARTERS E-MU SYSTEMS, INC. [. . . ] When a new sample is taken, the low and high keys are automatically adjusted to accommodate the new sample. Sample Manage 173 You don't ever have to set the low and high keys!Simply define the original pitch and you're finished. Samples are automatically named using the name of the preset appended with the original key name (i. e. White Key* Voice: A new sample will be placed on the lowest available white key beginning at the original key you select (C1 is the default starting key). Each new sample will create a new voice. 1 Key* Voice: A new sample will be placed on the lowest available white or black key beginning at the original key you select (C1 is the default starting key). Each new sample will create a new voice. 2-24 Key* Voice: New samples will be placed over a keyboard range consisting of the number of keys selected. You can select the starting key by manually setting the original key (C1 is the default starting key). Each new sample will create a new voice. To Create an Auto-Multisample: This function works especially well for sampling other synthesizers. The LED will illuminate and the main screen will appear. Set up the sampling parameters such as sample length, sample source and take the sample. Press the original key on your MIDI keyboard. Set Truncate to Both, Normalize to Relative, Loop to 1/4 + xfade. Set the target preset to an empty location. The E4K asks you to name the preset (if it was empty). The E4K will perform the DSP functions, then auto-place the sample. If you wish to take additional samples do so now. Simply define the original key using your MIDI keyboard then press Place after taking each sample. Sample Manage 174 Emulator Four Keyboard Place Sample After sampling, a sample is automatically assigned to its own voice. This function allows you to place the voice (and the sample) onto a range of the keyboard without leaving the Sample Manage module. To Place a Sample: 1. The LED will illuminate and the main screen will appear. Select the sample to be placed using the data entry control, inc/dec keys, or the numeric keypad. [. . . ] E-mu Systems specifically disclaims the implied warranties of merchantibility and fitness for a particular purpose. Exclusion of Certain Damages E-mu Systems' liability for an E4K found defective is limited to repair or replacement of the unit at E-mu's option. In no event shall E-mu Systems be liable for damages based on inconvenience, whether incidental or consequential, loss of use of the unit, loss of time, interrupted operation or commercial loss, or any other consequential damages. Appendix 362 Emulator Four Keyboard Some states do not allow limitation of the duration of implied warranties or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. How To Obtain Warranty Service All E-mu products are manufactured with the highest standards of quality. [. . . ]