User manual E-PIL MEDTIME

[. . . ] If the fault cannot be corrected, contact your distributor. 2. Display Self Test Med-Time has a built-in self test function. Start Test Make sure that the Medication Tray is in the device. [. . . ] Exit the test mode by pressing button 3. Contact e-pill or AMAC if you encounter any problems with your Med-Time unit. 3. Med-Tray (two trays supplied with one dust cover) Programming Buttons 1, 2 and 3 Also included with your e-pill system (see below): Namn: Medicin Styrk Doserin g Morg Midd Kväll Nat S Mo ön rg S Midön d Sön Kväll Mo Lör rg Lö Kvä r Tis g Sön n ll or n Sön Mån Må Morg Sön Mån Må äll M Natt Morg Midd Kväll Morg Kv Läkare Prescription Card Dosage Templates (2) Kv Tis äll O Mor ns On g s Kväll M Na ån tt Ti Mor s g Tis Midd Fre ll e Tor Tor Fr rg Kvä Morg Kväll Mo Tis Kväll Ons d s id Tis On rg M Natt Mo Keys (2) Extra Med-Tray with dust cover 2 Mo Lör rg Lö Kvä r ll Prescription Fre r Natt Lör Lör Lö äll Morg Midd Kv O Kv ns Tis äll äll Ons v N Tis K Sön n att org Tor Morg Sön Mån Må äll M Kväll Morg Kv Midd O Morns g Fre d id Fre g M r or Tor To tt M Kväll Na Fr Kvä e ll Ons Kväll Fre ll vä Tor Tor Frerg K Morg Kväll Mo Lör t Nat (4) AA Batteries Instructions Alarm Tone(s) Med-Time has 3 different alarm tones to accomodate different hearing levels. Symbols A, B and A+B on the display indicate the selected alarm tone. To change the alarm tone of MedTime, first hold button 3 and then, at same time press and hold button 1 to choose the next alarm tone. Continue to hold button three and press button 1 to listen to and select the different tones. No alarm signal If you do not require an audible alarm signal, continue to press button 1 until neither the A, B or A+B alarm tone setting is displayed. Med-Time Med-Time is designed to remind and dispense pills (medications and vitamins) in accordance with your dosage schedule from one (1) to four (4) times per day. Using Med-Time for the first time: Open the battery door and remove the plastic strip to turn on Med-Time. Lock Med-Time can be locked using the enclosed key. To lock Med-Time, turn the key a quarter of a turn counter-clockwise. Open the lid as illustrated to access and remove the Med-Tray. Insert the appropriate dosage template (1 to 4X daily) on the tray and load your pills accordingly. Maintenance Batteries should be changed when the indicator lights up on the clock display (normally after Battery indicator. Fit the batteries as indicated in the battery compartment. Clock time, alarm settings and alarm tone will remain set after battery change. When necessary, plastic parts can be wiped off with a damp cloth. Do not wash the Med-Time as electric components will be damaged 6 3 Filling and Programming Med-Time Fill compartments (28 available) with pills using the dosage template as a guide (1, 2, 3 or 4 times per day). Note: If you take pills three times per day, one compartment will be left empty. The first dose scheduled to be dispensed after Med-Time is programmed is placed to the right of the lock. When Med-Time alarms, the tray will turn clockwise making the pills availble through the opening. Turn Med-Time over to dispense pills into your hand. Setting of Clock and Alarm times (Instructions also available on inside of Med-Time Lid) Setting the Clock 1. [. . . ] If one lets the display continue to blink in the setting mode it will automatically return to normal function after approximately one minute. 12/24-hour time formats Med-Time automatically defaults to a 24 hour time format (Military time). To switch to a 12 hour format, press buttons 2 and 3 simultaneously. [. . . ]