User manual E-TEN M700

[. . . ] GPS Pocket PC User Manual Safety Instructions Please Read Before Proceeding. This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. Before you install the SIM card, make sure that tap the ALL OFF Button in Wireless Manager to turn off your Pocket PC's mobile phone, Bluetooth, and wireless LAN functions. [. . . ] Not required to set Proxy Advanced tab, Select Networks Button, and then select My Work Network from "Programs that automatically connect to the Internet should connect using:" menu Refer to the above and set as My Work Network 1. Data Encryption: Select WEP to enable the entry bar regarding Network key Office , Settings, the Refer to the above Connections tab, and set the items Connections, the for Network key Tasks tab, select "Edit my proxy server, " and then check the Internet items to enable the entry bar about Proxy WLAN select different Access Point Café or Refer to the above and 1. Close Proxy connection restaurant set as My Work Network 2. Not required to set Proxy Using Wireless LAN 8-3 Configure Your Wireless Network (Reference for a normal network setup) You will need a correct IP address, DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company. When your Pocket PC is unable to automatically detect or connect to a usable wireless network, please try to configure the network manually. Please refer to this section's settings instructions. Select the icon in the Wireless Manager main menu, a icon will display on the navigation bar. Then tap , Settings, the Connections tab, Connections, and then the Advanced tab, the screen displays shown on the left. Select the Select Networks Button. 8-4 4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My ISP for the first item. In the Wireless Manager main menu, select to enter the WLAN Utility screen. Then select the Configure Button to enter the WLAN setup screen. Using Wireless LAN 8-5 7. Select name of a currently available network to enter the WLAN authorization setup screen. 8. Set accordingly to the rules and information provided by the hotspot location. Authentication: Select Open Data Encryption: Select WEP to enable the entry bar about Network key Network key Network index 9. Tap and hold on the name of the network connection that you can currently use, then select Connect. When the icon appears on the top of the screen, your wireless network has been successfully connected. 8-6 Configure Your Wireless Network (Reference for Proxy setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company's network administrator. If your company's networking environment doesn't need Proxy server settings, please close the proxy connection. Tap , Settings, the Connections tab, Connections, and then the Tasks tab. [. . . ] Answer: Tap , Settings, the System tab, Screen, and then the Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen. Try and change them so that you can read more smoothly. [. . . ]