User manual EAGLE ACCUNAV SPORT

[. . . ] TM Sport AccuNav Spor t OPERATION INSTRUCTIONS WARNING! DO NOT USE THIS PRODUCT WHILE OPERATING ANY VEHICLE! WARNING! USE THIS GPS RECEIVER ONLY AS AN AID TO NAVIGATION. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. CAUTION This GPS receiver, (like all GPS navigation equipment) will show the shortest, most direct path to a waypoint. It provides navigation data to the waypoint regardless of obstructions. Therefore, the prudent navigator will not only take advantage of all available navigation tools when travelling to a waypoint, but will also visually check to make certain a clear, safe path to the waypoint is always available. [. . . ] The menu CLEAR PLOT shown at right apTo clear or erase the solid track line from the screen, pears. Now press the use the Clear Plot menu selection. The plotter will key next to the desired continue to draw your track after the F2 key is pressed, trail number. For exstarting from your present position. ample, if you wish to 34 save the trail currently displayed on the screen as plot trail number 1, simply press the F1 key. The AccuNav SportTM saves the current trail and returns to the plotter screen. These trails are saved in memory and are not erased when the unit is turned off, but they are erased when the unit is preset. RECALL PLOT TRAIL To recall a plot trail, first press the MENU key while the plotter is displayed. Simply press the key next to the 35 trail that you wish to recall. For example, to recall plot trail number three, press the F3 key. The AccuNav SportTM returns to the plotter screen and draws the recalled trail on the screen. Note that this recalled trail doesn't affect your current trail; both will be displayed. Also note that the recalled plot trails are position specific. In other words, the plot trail is not simply a line drawn on the screen, it represents the location you were in when the plot trail was drawn. ICON ON/OFF Pressing the F5 key while the first plotter menu is displayed turns the icons off that you placed on the screen using the ICON key. For more information on this feature, see the ICON section. This also turns off all of the waypoint icons. PLOTTER MENUS - PAGE 2 right side of this page appears. To switch back to the Pressing the right arrow key while the first plotter menu normal plotter screen, press the MENU key twice while is showing displays the second plotter screen as shown the plotter is showing, then press the F1 key. CHANGE DISPLAY FULL PLOT The four digital displays on the left side of the plotter Normally, the plotter screen can be has a row of digital changed or customdisplay boxes on the ized at will. AccuNav SportTM is To erase these boxes first turned on, or afand use the whole dister it's preset, the four play for the plotter, digital displays are press the F1 key while Distance To Go the second plotter (DTG), Speed Over menu screen is showGround (SOG), Bearing. A screen similar ing to waypoint to the one at the far (BRG), and Course 36 Over Ground (COG). The available displays that can be placed in these windows are: Distance To Go (DTG), Speed Over Ground (SOG), Bearing to waypoint (BRG), Course Over Ground (COG), Cross track error (XTE), and Altitude (ALT). [. . . ] To view these windows, press the WINDOWS key, then press the MENU key. Now press the key next to the "MAIN MENU" label. Finally, press the key next to the "VIEW ALL WINDOWS" label. 77 78 79 80 81 MENU SUMMARY The position and steering screen's main menus are shown on these pages. The first is to simply repeatedly press the MENU key while either the position or steering screen are showing. [. . . ]