User manual EAGLE CUDA 250I S MAP

[. . . ] 988-0152-101 www. eaglesonar. com & Cuda 250i S/Map Fish-finding Sonar & GPS Installation and Operation Instructions Copyright © 2005 LEI-Eagle All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Eagle®, Cuda® 250 S/Map and Cuda® 250i S/Map are registered trademarks of LEI. eXitSource Database, copyright 2001-2005 Zenrin Co. [. . . ] To choose one, press EXIT to clear any menus, then press PAGES and use the keys to select the desired mode. Full Sonar Chart This is the default mode used when the Sonar is turned on for the first time or when it is reset to the factory defaults. The bottom signal scrolls across the screen from right to left. Depth scales on the right side of the screen aid in determining depth of targets. The line at the top of the screen represents the surface. 76 The bottom depth and surface temperature (if the unit is equipped with a temperature sensor or a transducer with a temp sensor built in) show at the top left corner of the screen. The FasTrackTM display shows just to the right of the scale. This changes all echoes into short horizontal bars, replicating a flasher sonar. The zoom bar on the far right shows the area that is zoomed when the zoom is in use. (See the Zoom section for more information. ) Full Sonar Chart. The Overlay Data (depth and water temperature) are set to a different text size. Split Zoom Sonar Chart A split chart shows the underwater world from the surface to the bottom on the right side of the screen. The left side shows an enlarged version of the right side. The zoom range shows at the bottom left corner of the screen. 77 Split Zoom Sonar Chart. First image (left) shows the left window zoomed to 2X. The second image (right) shows the left window zoomed to 4X. The depth overlay data is set to the default large text size. The water temperature is set to the medium text size. Digital Data/Chart This mode shows nine digital boxes or windows containing (by default): Water Depth, Water Temp, Position Error, Bearing, Distance, Speed, Travel Time, Track and Off Course. Digital Data/Chart 78 Sonar Simulator This unit has a built-in simulator that will allow you to practice as though you were on the water. All sonar features and functions will be useable during a simulation. When in simulator mode, you will see [Simulator Mode] in the Sonar Page title bar. From the Sonar Page, press MENU|MENU| to SONAR SETUP|ENT. Select SONAR SIMULATOR ON and press ENT. If you want to simulate your position, highlight SIMULATE POSITION and press ENT, which will turn on the GPS Simulator. [. . . ] Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. Eastern Standard Time, M-F . . . outside Canada and the USA: If you have technical, return or repair questions, contact the dealer in the country where you purchased your unit. [. . . ]