User manual EAGLE EXPEDITION 2 ADDITIONAL INSTRUCTIONS

[. . . ] Expedition II INSTALLATION AND OPERATION INSTRUCTIONS TM Copyright © 1996, 1997 Eagle Electronics All rights reserved. Expedition IITM is a trademark of Eagle Electronics Eagle® is a registered trademark of Eagle Electronics WARNING!USE THIS UNIT ONLY AS AN AID TO NAVIGATION. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. [. . . ] Using the left and right arrow keys, highlight each number in the position and change it using the up and down arrow keys. When you're ready to save this position and return to the waypoint screen, press the ENT key. Press the EXIT key to erase the menus and return to the navigation, plotter, or windows screen. Note: You can also use this method to change the position of an existing waypoint. Edit Icon To change the icon assigned to a waypoint, first select the waypoint, then choose OPTIONS from the waypoint menu. Use the arrow keys to select the icon that you want to assign to the waypoint, then press the ENT key. The waypoint now has the new icon. 26 WAYPOINT NAVIGATION The Expedition II makes it easy to navigate to any waypoint. All you have to do is select the waypoint (see page 26), then highlight the "GO TO" label on the waypoint screen and press the right arrow key. The unit immediately shows navigation information to the waypoint on all navigation, plotter, and windows screens. In this example, waypoint number 5 was recalled. Switching to a plotter number two screen (shown at right) shows the starting location "S", the recalled waypoint "5", the plot trail from the starting location to the present position, and the present position. Navigating to a cursor location This unit lets you navigation to a location without storing it in the waypoint database by using the plotter and cursor. To do this, first switch to a plotter screen. Now move the cursor to the location that you want to navigate to. A new, highlighted menu appears on the list: "Go To Cursor". It now shows navigation data to the cursor location (shown as "D" on the plotter). See the screens below. 27 Navigating to a Waypoint using the Plotter The unique "birds-eye" view used by the plotter gives you an easy way to navigate to a waypoint. On the plotter screen shown above, the diamond with a cross in it is your present position. The box with the "S" in it was your starting location when you recalled the waypoint. The dotted line is called a track line and is the shortest path from the starting location to the destination. The number "1" is waypoint number one, which is the recalled waypoint and the destination. The "D" on the plotter screen at the top of this page is the cursor destination, when the cursor position is used as a destination. If you follow the track line, you'll reach the destination, covering the shortest distance in the least time. [. . . ] Always use the original shipping container and filler material the product was packed in when shipping your product. 2 Always insure the parcel against damage or loss during shipment. Eagle does not assume responsibility for goods lost or damaged in transit. For proper testing, repair, and service, send a brief note with the product describing the problem. [. . . ]