User manual EAGLE FISHEASY 240 OPERATION INSTRUCTION

[. . . ] 988-0143-751 www. eaglesonar. com & FishEasy® 240 Portable Fish-Finding & Depth-Sounding Sonars Installation and Operation Instructions Copyright © 2004 LEI-Eagle All rights reserved. Eagle® is a registered trademark of LEI FishEasy® 240 is a registered trademark of LEI Eagle Electronics may find it necessary to change or end our policies, regulations, and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to change without notice. [. . . ] Menus change depending on the mode the unit is in. Messages may appear in menu boxes or new menus can appear, depending on previous selections. 42 Menu This screen shows a typical menu, the Scroll Speed menu. Display ­ Opening Screen The lights flash for about 10 seconds when the unit is turned on. The backlight menu first appears on the screen. If you don't press a key, the menu will disappear after a few seconds. If you don't want to wait, press PWR to clear the menus from the screen. When the sonar unit is first turned on and the backlight menu disappears, the display screen shows the Full Chart Page, or mode. The depth range shows on the depth scale on the right side of the screen. On the screen below, the range is from 0 to 60 feet and the bottom depth is 33. 2 feet, shown by the digital sonar. 43 Digital depth School of bait fish Surface clutter Fish arches near bait fish Depth scale Grayline Depth range at bottom of depth scale Thermocline Bottom signal Speed Opening screen, Full Chart page, or mode. Chart Scroll (stopping and starting) In normal operation, the sonar chart will scroll from right to left across the screen. You can stop the chart from scrolling across the screen. This is useful when you want to "freeze" the picture to study it more closely. To stop or start the chart, press MENU until the CHART menu appears. Use the arrow keys to select or highlight the desired setting, then press PWR to clear the menu. 44 Chart menu. Chart is running or scrolling normally at left. Chart is stopped at right, and "Stopped" warning message appears. Screen Display Modes or Pages The FishEasy 240 has three screen display modes, or "Pages:" Full Chart page, Split Chart page and Large Digital page. The FishEasy 240 Page menu lets you select among the display modes, or pages. To switch from one page to another page, press MENU until the PAGE menu appears. Press UP ARROW or DOWN ARROW to select the desired 45 page. (The screen changes as you move through the menu. ) When the page you want is selected, press PWR to clear the menu. Full Chart This shows all echoes scrolling across the full screen. The bottom signal scrolls across the screen from right to left. Depth scales on the right side of the screen make it easy to determine the depth of fish, structure, and other targets. The line at the top of the screen represents the surface. The bottom depth (as determined by the digital sonar) shows in the upper left corner. Full Chart page, showing digital depth at top and speed at bottom. If an optional speed or temperature sensor is connected, digital displays for speed and/or temperature will also be shown. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. [. . . ]