User manual EAGLE SEACHARTER 500CDF

[. . . ] 988-0156-041 www. eaglesonar. com FishElite 500C and SeaCharter 500CDF Fish-finding Sonars & Mapping GPS Installation and Operation Instructions Copyright © 2004 LEI-Eagle All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Eagle®, FishElite 500C and SeaCharter 500CDF are registered trademarks of LEI. [. . . ] (See the Zoom section for more information. ) Full Sonar Chart. The Overlay Data (depth and water temperature) are set to different text sizes. Split Zoom Sonar Chart A split chart shows the underwater world from the surface to the bottom on the right side of the screen. The left side shows an enlarged version of the right side. The zoom range shows at the bottom left corner of the screen. 78 Split Zoom Sonar Chart. Image at left shows the left window zoomed to 2X. Press ZIN and the left window zooms to 4X, shown at right. Digital Data This mode shows the chart on the right side of the screen. The left side has five large digital data boxes containing (by default): Water Depth, Water Temperature, Water Speed (from an optional speed sensor), Water Distance (distance traveled or log, it also requires a speed sensor) and an air temperature sensor. The Depth box also shows settings for the Shallow and Deep alarms. Digital Data. Customizing the Digital Data Screen The Digital Data screen can be customized to show digital data different from the defaults first shown. From the Sonar Page (in Digital Data mode), press MENU| to CUSTOMIZE|ENT. 79 At left, the Sonar Page Menu showing the Customize command highlighted. At right, the label for the first customizable data box (Water Temp) begins flashing to indicate it is selected. 2. The Water Temperature box title bar flashes, indicating the box contents can be changed. Press ENT or press or to select a different box, then press ENT. Press or to select a different type of data, then press ENT|EXIT|EXIT. (The top Depth box cannot be customized. ) Data Viewer list for customizing Digital Data boxes. At left, the list first appears with Water Temperature selected. At right, Maximum Speed has been picked to replace Water Temperature. (Select a "+" category and press ENT to expand the list, or select a "­" category and press ENT to collapse the list. ) Tip: You can customize other digital data boxes before returning to the Sonar Page. After changing the first box by selecting the Data Type and pressing ENT|EXIT, use the or key to select another box to change. When the selected box title bar flashes, press ENT then or 80 to select data type|ENT|EXIT. Repeat these steps until you're finished customizing, then press EXIT to return to the Sonar Page. Map With Sonar Split Screen There is a page mode that splits the screen in half, with the map on the left and the sonar on the right. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. [. . . ]