User manual EARLEX STEAM CADDY IS 2000

[. . . ] Instant Steamer ­ Model IS2000 USER INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE Thank you for purchasing an Earlex Instant Steam Cleaning Kit. In order to obtain the best results from this product, please read these instructions & make a special note of the Safety Rules before commencing any work. EARLEX LTD. WILL ACCEPT NO RESPONSIBILITY FOR THE USE OF THIS PRODUCT IF USED FOR ANY OTHER PURPOSES THAN THOSE DETAILED HEREIN RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE CONTENTS Important Information Check that your Steam Caddy is complete Safety Rules Safety Precautions Steam Cleaning Delicate materials About your Earlex Steam Caddy Features Guide Preparing your Steam Caddy for use Using the main attachments Using the mini attachments Getting started Cleaning & maintenance Storing the unit Trouble Shooting Spare parts Mains connection Guarantee 3 4 4 4 5 7 8 9 11 12 13 13 14 14 15 16 BEFORE PROCEEDING ANY FURTHER PLEASE CHECK THAT YOUR EARLEX STEAM CADDY IS COMPLETE. HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM 2 OPENING THE CARTON When you open the carton, you will see a plain brown carton containing the Caddy unit, which has the 4 main attachments stowed inside and 2 Extension Tubes. [. . . ] For normal cleaning purposes and for general use the Bonnet would be fitted. When removing creases from garments and hanging curtains you can sometimes improve the appearance of the material by using the head without the Bonnet attached. It is best to experiment to get the best finish for you. This tool can also be used either fitted directly onto the Hose Handle or fitted to one or both Extension Tubes. Firstly select which is best for the task in hand and assemble together. CALL FIRST IF YOU HAVE ANY PROBLEM 10 Fitting the Bonnet (32) to the Upholstery Cleaner (29) Take the Bonnet, place it on a flat surface with the strings at the top and the nap facing outwards and place the Upholstery Cleaner in the middle. Pull the string until the Bonnet fits tightly to the Upholstery Cleaner, and tie with a bow. When cleaning upholstery you will need to glide the head across the material in the same way as when using the Floor Cleaner. The bonnets will need to be replaced as they become dirty. Do not use bleach or fabric conditioner and use only one third of normal soap powder to avoid clogging the fibres. Spare Bonnets can be purchased from Earlex or you can make your own using Terry Toweling material. The Upholstery Cleaner can also be used very effectively for removing the creases from hanging curtains. Upholstery Cleaner/Clothes Steamer To set up your Steam Caddy as a Clothes Steamer proceed as follows:In the Plug Storage Recess (22) there is a socket (23) to accept the button end of the Extension Tubes. Fit the Extension Tubes together and then locate both into this socket. Now fit the Clothing Attachment Rest (30) into the top of the Extension Tube. Your clothes can now be hung from this Clothing Attachment Rest using a normal coat hanger. Press the Steam Release Button and pass the Clothes Steamer lightly across the surface to remove creases and wrinkles from your clothes. We recommend that the unit remains on the floor and shorter garments are steam cleaned from a seated position as shown. Longer garments can be hung from a wardrobe rail or over the top of a door. The Clothing Attachment Rest is used to "park" the Clothes Steamer safely in between steaming your clothes. It can also be used to park the Window/Tile Cleaner. Please note, the Clothes Steamer is designed to refresh clothes (i. e. [. . . ] 4) A replacement fuse must be rated at 10amp. The fuse must be manufactured and approved to BS1362. 5) IF IN ANY DOUBT PLEASE CONSULT AN ELECTRICIAN. If you need to fit a re-wireable plug to the Mains Lead, this should be done in accordance with the wiring instructions shown below, and will need to be fitted with a 10amp fuse. [. . . ]