User manual EBENCH KH 2186 CLOCK RADIO

[. . . ] Lay the cable such that it cannot be trapped or otherwise damaged. Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. The technical reality of this appliance is that it enables an adjustable frequency range of FM 87, 1 109, 2 MHz resp. In some countries, different national regulations may apply to the assigned radio frequency ranges. [. . . ] Do not keep the appliance in places that are exposed to direct sunlight. If you do, it may overheat and become irreparably damaged. To prevent heat build up, place the instrument in a location with adequate ventilation. With the insertion of a 9 V block battery (Typ 6LR61) you can avoid interruptions in the functioning of the appliance and that programmed data, for example the time and alarm times, are lost due to a power cut. The battery ensures that the appliance continues to function in emergency operation during the power cut. When power is restored, the correct time automatically appears on the display w. The alarm, radio and display do not function with battery-power. If you do not intend to use the appliance for an extended period, remove the battery. Should the batteries leak, clean the battery compartment with a dry cloth whilst wearing protective gloves. In the event of an extended power cut (several hours), the clock and alarm times must be checked and possibly re-adjusted. Do not permit small children to play with the plastic packaging. Select a power socket that is at all times easily accessible, so that the plug can be quickly withdrawn in the event of a malfunction. When you have found the best reception for the desired transmitter, fix the wire aerial into this position e. If you are setting the appliance up for the first time after inserting a new battery: Whilst holding the button TIME d pressed down: · Release the button HOUR u as soon as the desired hours setting is shown in the display w. Release the button MIN y as soon as the desired minute setting is shown in the display w. Release the button HOUR u as soon as the desired hours setting is shown in the display w. Release the button MIN y as soon as the desired minute setting is shown in the display w. Push the slider switch j into the position. Now select the desired transmitter through turning the tuning knob f. Push the slider switch j into the position AUTO. For control purposes, a small spot appears to the left in the display w. If you wish to listen to the radio for some time before falling asleep and want the appliance to switch itself off: · You can extend the time to switch off by. [. . . ] This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. Used batteries/accumulators may not be disposed of in household waste. [. . . ]