User manual EBENCH KH 2254 CD CLOCK RADIO

[. . . ] This consumer electronics appliance, being in conformity with their fundamental requirements and directions, complies with the regulations of both the EMC Guidelines 2004/ 108/EG and the Guidelines for Low Voltage Appliances 2006/95/EG. Mains voltage: Back-up power : (Batteries not included) Power consumption : Standby: Protection class: 230 -240 V ~ / 50 Hz 9 V Block battery Type 6LR61 9W 2, 8 W II / Connect the appliance only to correctly installed and properly earthed power sockets. Ensure that the rating of the local power supply tallies completely with the details given on the rating plate of the appliance. ⷠEnsure that the power cable never becomes wet or damp during operation. [. . . ] The battery ensures that the clock continues to function in the event of a power failure. To prolong the life, however, the time is not shown in the display. If a battery is not inserted, after a power failure 12:00 appears on the display. This means that you have to carry out the time and alarm settings again. Do not permit small children to play with the plastic packaging. For setting the time, the appliance must be switched off with the button ON/OFF u. Whilst unpacking, check to ensure that all of the following items are available: · Setting the time when switching on for the first time: · This CD clock radio is operated with 230 - 240 Volt alternating current (AC), 50 Hz. It is additionally equipped with a back-up system for use in the event of a power failure, for which a 9 V block battery (not supplied) is required to be inserted. ⷠConnect the plug of the power pack with a wall power socket (AC). ⷠInsert the 9 V block battery into the battery compartment 3) on the underside of the appliance. For the afternoon hours, an additional LED showing "PM" now appears at the top left of the display. In order to ensure optimum functioning, the battery should be changed every 6 months. For this, the switch FM STEREO/MONO 3@ must be positioned at FM STEREO. You can also use the button PLAY/PAUSE 2# to temporarily interrupt the playback of a title. The playback can be stopped by pressing button STOP 2@. Press the button SKIP/SEARCH HR w to skip to the next title, or press the button SKIP/SEARCH HR w several times to skip forward over several titles. Press SKIP/SEARCH MIN w to go back to the start of a title, or press the button SKIP/SEARCH MIN w several times to skip back over several titles. When SKIP/SEARCH MIN or SKIP/SEARCH HR w are held down, particular points within a title can be quickly searched for and found. (with the labelling uppermost) lightly onto the cone in the CD compartment until it engages. After pressing the power button ON/OFF u the total number of titles on the CD is shown in the display i. In the Display i first appears 01 , shortly thereafter the time is however displayed once again. Once to repeat the Once more to repeat playback of the whole CD. [. . . ] In the event that the processing of your complaint is not possible by telephone, you will receive · A processing number (RMA number) as well as · An address to which you can send your product for warranty processing. In the event of a mail despatch, please enclose a copy of the purchase receipt (sales slip). The appliance must be securely packed and the RMA number clearly visible. Products sent in without an RMA number cannot be processed. [. . . ]