User manual EBENCH KH 2204

[. . . ] 6 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switching On / Off . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Time and Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] b) Selecting the Reception Range (Band) ² Select the desired reception range with the sliding switch: - USW = Ultra Short Wave - MW = Medium Wave - SW = Short Wave - LW = Long Wave c) Changing the Medium Wave Rage The frequency range and tuning intervals of MW vary by region: Set the sliding switch to - up in the region "USA" - down in the region "Europe". d) Searching for Stations ´ Press briefly on one of the two TUNING buttons to search upward or downward in steps. ´ Hold one of the TUNING buttons pressed to start a scan. The device stops as soon as a sufficiently strong station is found. Pressing the button again will continue the scan. 9 KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 10 e) Short Wave (SW) Sensitivity If the the scan process frequently lasts too long, for instance because too many signals are received in the evening, the sensitivity can be reduced to short wave (local reception). ¿ Set the sensitiviy switch to - RX for local reception - LX for long-range reception. f) Sensitivity and Antennas The telescoping antenna is responsible for USW and short wave (SW). You can alter the reception strength by adjusting the length, inclination and direction of the antenna. A ferrite antenna is built into the device for medium wave (MW) and long wave (LW) reception. Turn the entire device to alter the reception strength. 7. Memory A total of 160 memory positions are available ­ specifically . . . An alarm tone is also available in place of the radio alarm function. a) Setting the Time When the device is switched off, and the date and time appear in the display in alternation: µ Press the button MODE . ´ Press one of the TUNING buttons briefly to set the time by minute. ´ Hold one of the TUNING buttons pressed to change the time in 10-minute steps. b) Setting the Date ¾ Press the button MODE until the date blinks in the display. ´ Press one of the TUNING buttons briefly to set the date by day. ´ Hold one of the TUNING buttons pressed to change the date in 10-day steps. c) Accepting the Time / Date You do not have to do anything to accept the time and date ­ the newly set time or date is accepted immediately after making the setting. 13 KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 14 d) Setting the Home Time Region Set the time region here in which you typically reside: µ Press the button MODE until LOCAL CITY appears in the display. ´ Use the TUNING buttons to select your home time region: Code UTC LON MUN FRA PAR ROM CAI IST MOW KWI DXB KHI Applies to Time Region Difference to UTC 0 0 1 1 1 1 2 2 3 3 4 5 14 Universal Coordinated Time . . . . . . Paris / France . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rome / Italy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cairo / Egypt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 15 seconds, the device returns to the normal time display. If you would like to be woken by the radio, you should select the desired station and volume level before going to sleep. You can then simply switch off the device. h) When the Alarm Goes Off When the alarm tone or the activation of the radio function is triggered at the alarm time, you can . . . reset the alarm by 9 minutes (snooze function) by pressing the SNOOZE button, º or press the respective ALARM button to reset the alarm to the next day. [. . . ]