User manual EBENCH KH 2205

[. . . ] You can also terminate the alarm action by pressing the off button (6) (AL/OFF) or setting the auto switch (16) to the "OFF" position. · If you leave the auto switch (16) in the "AUTO" or "BUZZ" position you will be woken up again at the preset time 24 hours later. As soon as the auto switch (16) is set to the "AUTO" or "BUZZ" position the alarm sign (1) will light up on the display. [. . . ] The maximum time the radio will play on is 1 hour and 59 minutes. · Set the auto switch (16) to the "AUTO" or "BUZZ" position. · Press down the "SLEEP" button (7). "0:59" will appear on the display. If you release the button now, the radio will switch off automatically after 59 minutes. If you want the operating time to be shorter, press the "SLEEP" button (7) and the "MINUTE" button (3) simultaneously, until the desired operating time is displayed. If you want the operating time to be longer, press down the "SLEEP" button (7) and the "HOUR" button (2) simultaneously. This will increase the operating time by 1 hour (to a maximum of 1:59). If the display is flashing the battery has to be replaced. Use leak-proof batteries in order to avoid damage to the device. CONTROL OF TIME AND ALARM · Control and adjustment of time: Press down the buttons "TIME" (4) and "HOUR" (2) simultaneously until the desired hour appears on the display. Press down the buttons "TIME" (4) and "MINUTE" (3) simultaneously until the desired minute appears on the display. · Control and adjustment of alarm time: Press down the buttons "ALARM" (5) and "HOUR" (2) simultaneously until the desired hour for the alarm appears on the display. Press down the buttons "ALARM" (5) and "MINUTE" (3) simultaneously until the desired minute for the alarm appears on the display. · Using the dimmer (15) (HI/LO) you can control the brightness of the display. SAFETY PRECAUTIONS · Only operate the device at the correct mains voltage (230 Volt/50 Hz). · In order to avoid the risk of fire and shock hazard electric devices of this kind must not be exposed to high temperatures or moisture. For longer and better operation never place the device near water or radiators but in a position with good air circulation. [. . . ] · If required, clean the housing only with a soft cloth (Ensure that the mains cable (14) is not connected to the socket). Never use cleaning agents, since the housing might be damaged otherwise. · Never take off the lid of the housing, since the device contains electrical parts with high mains voltage. [. . . ]