Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ECLIPSE D2. We hope that this ECLIPSE D2 user guide will be useful to you.
Lastmanuals help download the user guide ECLIPSE D2.
Detailed instructions for use are in the User's Guide.
[. . . ] (1)This
stand
is
meant
for
use
with
the
specified
speaker
systems.
Please
do
not
use
stand
for
other
functions. [. . . ] (6)To
clean
the
stand,
gently
wipe
the
surface
with
a
soft
cloth
moistened
with
a
mild
cleaning
solutions.
Do
not
use
chemicals
such
as
thinner
or
solvent.
Flush Head Allen Screws× Top Plate×
Support Column× Base Plate×
After completing final assembly of the top plate and base plate, leave the stand resting on its side and attach the leg pins to the base plate extending above the base plate surface by about 5 threads. Attention If the leg pins are properly threaded but are still hard to turn, use the small hard to turn, use the small Allen wrench to turn them.
Leg Pin Locking Nuts×
Small Allen Wrench× Large Allen Wrench× Flush Head Allen Screw×4 Leg Pin Locking Nuts×5 Leg Pin×5 Leg Pin Plate×5
Flush Head Allen Screw×
Leg Pin× Leg Pin Plate×
Place the top plate on the standing support
columns. Use the large Allen wrench to attach the 4 flush head Allen screws, lightly fastening the top plate to the columns. Do not completely tighten the screws at this time.
After the leg pins have been attached, set the stand upright and place it in the location desired for use. Attention When setting up or moving the stand, be careful that the leg pins do not scratch your floor. Using the small Allen wrench, turn the leg pin down so that it becomes flush. After adjusting the last leg pin, set the locking nut in place. [. . . ] Attention Be sure the Allen wrench is pushed all the way into the screw's socket before tightening.
After
Base
Plate Weight Height(mm) L×Wmm) (kg) 350×325 720 28
Specifications and external appearance may change without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ECLIPSE D2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ECLIPSE D2 will begin.
