User manual EDIFIER MP300

[. . . ] They contain essential information to enable you to obtain the best performance from your Edifier MP300. Please retain this manual safely for future reference. Please adjust the volume control to a comfortable level to avoid damaging your hearing and the system. Humidity ---- Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them. [. . . ] Edifier warrants to the end user that all of its computer speaker systems are free from defects in materials and workmanship in the course of normal and reasonable use for a term of one year from the date of purchase. This warranty is the exclusive and only warranty in effect relative to Edifier multimedia speaker systems and any other warranties, either expressed or implied, are invalid. Neither Edifier nor any authorized Edifier reseller is responsible for any incidental or consequential damages incurred in the use of the speakers. (This limitation of incidental or consequential damage is not applicable where prohibited. ) Edifier's obligation under this warranty does not apply to any defect, malfunction or failure as a result of misuse, abuse, improper installation, use with faulty or improper equipment, or the use of the speaker systems with any equipment for which they were not intended. The terms of this warranty apply only to speaker systems when such speakers are returned to the respective authorized Edifier reseller where they were purchased. Under the terms of this warranty, the original consumer purchaser has certain legal rights and may have other rights, which vary worldwide. Please contact the seller as soon as possible if you find the speaker is the incorrect model or has sustained shipping damage. (The actual products may differ with the figure in appearance) Connect the Audio Input cable (1), one end into the Line In socket; the other end to any audio device (E. And to set it into Standby Mode, please press down the Volume UP (+) and DOWN (-) buttons together, and hold down either of them will wake up the system again. When system is activated, please refer to the following part: Please adjust the volume by pressing UP (+) or DOWN (-) button on the left control satellite to a comfortable level for listening. Please note that when the system is in standby mode, the LED Indicator on the subwoofer will flicker with a pulsing effect. Ensure that your subwoofer is plugged securely into a working AC wall outlet and that the blue power indicator LED is ON. Ensure your computer's internal volume settings are set to mid-level, and the Volume of the Controller Satellite (Left) is adjusted correctly. Mute on is ON when both the + and - Volume buttons are depressed, and OFF when they are both depressed again. Please try connecting your speakers to an alternate audio source, such as another portable CD player or Discman to determine that your speakers are working. please ensure the "S" plug connecting the satellites , is firmly inserted into the socket assembly on the subwoofer mounting base. Try substituting the audio connection to another source, e. [. . . ] For optimum acoustic performance, we recommend that you place your satellite speakers at least 6-8" from rear walls to reduce unwanted reflections that can muddy your sound. Bass frequencies may be enhanced or exaggerated by placing your subwoofer close to a wall or corner. Please feel free to experiment with the system's location to obtain the most pleasing effects. Edifier couples incredible technology with an amplified subwoofer to generate smooth deep bass, crystal clear highs, and enough power to ensure that your personal listening experience allows you to hear what you have been missing! [. . . ]