User manual EDIFIER S330D

[. . . ] Water and moisture ----Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them. Heat---- Place the speakers away from all heat sources. Ventilation ---- Do not block the openings in the speaker cabinets, never push objects into speaker vents or slots because of fire or electric shock hazards, and provide sufficient space around the speakers for proper ventilation. Location ---- Place the speakers in a stable location so they will not fall causing damage to the speakers or bodily harm. [. . . ] Edifier assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. Features Complete wooden MDF cabinet . Micro-Computer controlled , digital volume IC. LED digital display the volume value and other status. Volume fade-in and fade-out when power on/off. Full function infrared remote controller. 5. 1 channels inputs, Dolby Digital(AC-3) and DTS ready. Magnetically shielded design. Open the packing Please check the speaker Model number marked on the packing carton. Please contact the seller as soon as possible if you find the speaker is the incorrect model or has sustained shipping damage. S330D packing list 1 x Sub-woofer 5 x Satellite Speakers Overview 3 x Audio connecting cables(3. 5 stereo to 3. 5 stereo) 3 x Audio connecting cables(3. 5 stereo to RCA) 3 x speaker connecting cords for Left, Right and Center channels (about 2. 5m) 2 x speaker connecting cords for surround channels (about 5m) 1xremote controller (Model: RC15A) 2 xAAA batteries 1xUser s manual Diagram 1 Back panel Connections All of the speaker connections, audio inputs, power switch and power cord are concentrated on the back panel of the subwoofer. Use the diagrams below to help you identify these connections and get the system up and running quickly and smoothly. Input of left & rightaudio signal Input of surround audio signal Input of central and heavy-bass audio signal. Center VCR RIGHT Connected with AC power LEFT SR SL Diagram 2 Operating instructions Surround sound speaker systems using the 5. 1 format are designed to connect to compatible audio devices offering 5. 1 output. Many PC`s and DVD players already offer this type of output. Connect all 5 satellite speakers to their relative speaker output spring clips on the rear panel of the Subwoofer. Please note to match the colour, red to red and black to black. Note that the cable for the rear speakers is longer than the front. Connect the inputs to your PC or DVD player as shown in Diagram 2. Plug the AC power plug into the wall outlet, as shown in Diagram 2. REMOTE CONTROLLER The remote controller is shown in Diagram 3: F1: Reserved button Power:Power ON/OFF SURR+/-: Rear Surround channels volume relative control. This adjusts the relative volume of the rear speakers when compared with the master volume level. It can be changed from 0-9 with"5" being the equilibrium level. ". ": Resets the SURR/CENTER/SW volume levels to the factory default level. MUTE: Mute ON/OFF CENTER +/-: Centre channel volume relative control. This adjusts the relative volume of the centre speaker when compared with the master volume level. [. . . ] One or more speakers have no or low sound level: Are cables all connected properly?Are connectors fully seated in soundcard, speakers or Y-adapter (for two-channel cards)?Are surround, Main and subwoofer level controls properly adjusted on Control Pod?Are computer software settings adjusted for proper use? [. . . ]