User manual EDIMAX BR-6324NL VERSION 1.0

[. . . ] English Copyright© by Edimax Technology Co, LTD. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this Company . This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". [. . . ] Also, you can connect to the wireless access point with the same functionality only. If you wish to connect to the wireless access points made by other manufacturer, please select `AP Bridge-WDS' mode if the wireless access point you wish to connect supports WDS. Here are descriptions of every setup items: Item Name Band Description Please select the radio band from one of following options (must be the same with the wireless access point you wish to connect): 2. 4 GHz (B): 2. 4GHz band, only allows 802. 11b wireless network client to connect this router (maximum transfer rate 11Mbps). 2. 4 GHz (N): 2. 4GHz band, only allows 802. 11n wireless network client to connect this router (maximum transfer rate 150Mbps). 2. 4 GHz (B+G): 2. 4GHz band, only allows 802. 11b and 802. 11g wireless network client to connect this router (maximum transfer rate 11Mbps for 802. 11b clients, and maximum 54Mbps for 802. 11g clients). 2. 4 GHz (G): 2. 4GHz band, only allows 802. 11g wireless network client to connect this router (maximum transfer rate 54Mbps). 2. 4 GHz (B+G+N): 2. 4GHz Band, Allows 802. 11b, 802. 11g, and 802. 11N wireless clients. It's recommends to select this band to maximize compatibility. Select the channel number you wish to use; all access points must use the same channel. Input the MAC address of other wireless access points (the access points you wish to connect). Click `Set Security' button to set security functions of this wireless connection to improve security. Please refer to chapter 3-2-1-7 for detailed instructions. Channel Number MAC address 1 to 4 Set Security When you finished with the settings in this page, you can click `Apply' button to save changes you made in this page, or you can click `Cancel' to discard changes. After you click `Apply' button, you'll see the following messages: Please click `Apply' to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband router and continue on other settings later. You can click `Continue' to continue on other settings without restart the broadband router, however, the changes you made will not take effect before you restart the broadband router. 3-4-1-5 AP Bridge-WDS In this mode, this broadband router acts as both wireless communication bridge and wireless access point. This broadband router can establish communication with up to four WDS-compatible wireless access points, and let all computers connected to the LAN ports of every wireless access points communicate with each other. The broadband router is able to serve other wireless clients and acts as a wireless access point at the same time. Here are descriptions of every setup items: Item Name Band Description Please select the radio band from one of following options (must be the same with the wireless access point you wish to connect): 2. 4 GHz (B): 2. 4GHz band, only allows 802. 11b wireless network client to connect this router (maximum transfer rate 11Mbps). 2. 4 GHz (N): 2. 4GHz band, only allows 802. 11n wireless network client to connect this router (maximum transfer rate 150Mbps). 2. 4 GHz (B+G): 2. 4GHz band, only allows 802. 11b and 802. 11g wireless network client to connect this router (maximum transfer rate 11Mbps for 802. 11b clients, and maximum 54Mbps for 802. 11g clients). 2. 4 GHz (G): 2. 4GHz band, only allows 802. 11g wireless network client to connect this router (maximum transfer rate 54Mbps). 2. 4 GHz (B+G+N): 2. 4GHz Band, Allows 802. 11b, 802. 11g, and 802. 11N wireless clients. It's recommends to select this band to maximize compatibility. [. . . ] If you want to go back to previous page, please click `Previous'. 5-1 Internet Connection This page shows the current status of Internet connection. 5-2 Device Status This page shows current wireless LAN and wired LAN configuration. 5-3 System Log This page shows all logged system information. You can use scroll bar to view the logs, or click `Save' to download the log file to your computer. You can also click `Clear' to remove all logs, or click `Refresh' to reload logs. 5-4 Security Log This page shows all logged security-related information. You can use scroll bar to view the logs, or click `Save' to download the log file to your computer. [. . . ]