User manual EDIROL PR-50

[. . . ] Owner's Manual Thank you for your purchase of the PR-50 Realtime Video Presenter. 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. [. . . ] Right-click on the name of the clip you want to cut in the "Clips" list. A context menu appears. 2. Right-click on the location (even in another palette) where you want to paste the cut clip in the "Clips" list. A context menu appears. 4. Select [Paste]. The cut clip is assigned that location. Removing Clips 1. Right-click on the name of the clip in the "Clips" list you want to remove. A context menu appears. 2. Select [Clear]. The clip is removed. Materials are not deleted when clips are removed. Changing the Size of the Thumbnails in the "Clips" list 1. Right-click on the "Clips" list. A context menu appears. 2. Select [Appearance]. A submenu appears. 3. Select the display size. Select "Large" to display larger thumbnails, "Medium" for normal size, or "Small" for smaller-size thumbnails. 65 Practical Use of the PR-50 Editing Clips in the Palette Window You can edit clips in the Palette window. 1. Right-click on the "Palettes" list. A context menu appears. 2. Select [Open palette window]. The Palette window opens. fig. palette. window01. eps Context menu You can also open the Palette window by double-clicking in the "Palettes" list. 3. Select and right-click on the clip you want to edit. Select the parameter you want to edit. You can rearrange clip sequences and load materials in the Palette window. You can rearrange the sequence of clips by dragging and dropping them in the Palette window. You can also easily arrange materials in the Palette window by dragging and dropping from the "Clips" list or "Materials" list. 66 Practical Use of the PR-50 Making the Clip Settings Here you can set each clip's Loop Mode settings, In point and Out point, volume levels, and more. Clip settings are made in the Parameter Area. fig. editmode06. eps Parameters area Setting the Clip Playback Segment This sets the clip's In point and Out point. 1. Click on the clip whose playback segment you want to change in the "Clips" list. Use the time slider in the "Parameters" Area to move the preview cursor to the frames you want to set as the In point and Out point. fig. clip01. eps Preview cursor Current time The current time is indicated beneath the preview cursor. 67 Practical Use of the PR-50 3. You can move the cursor in the following ways. Dragging the Preview Cursor with the Mouse You can play back scrubs by dragging the preview cursor with the mouse (p. 71). Right-click the Time Slider with the Mouse fig. clip02. eps Time slider · [Jump to top frame] · [Jump to end frame] · [Jump to in point] · [Jump to out point] Context menu A context menu appears, allowing you to shift to the following points. Using the Transport Control fig. clip03. eps Transport control · · · · : Return to first frame : Go back 1 frame : Go back 10 frames : Start playback · · · · : Advance to last frame : Advance 1 frame : Advance 10 frames : Stop playback Using the In Point and Out Point Settings Icons fig. clip04. eps Jump to out point Jump to in point · · : Jump to In point : Jump to Out point 68 Practical Use of the PR-50 Using the Keyboard Shortcuts · Shortcut key + [Shift] + []: · Shortcut key + [Shift] + []: · Shortcut key + []: · Shortcut key + []: Go back 10 frames Advance 10 frames Go back 1 frame Advance 1 frame Shortcut key is set in the [Preferences] in Selector. This is set to the [Ctrl] key at the factory. For more detailed information, refer to "System Preferences" (p. 44). Using the Optional DV-7DLC · JOG/Shuttle Dial · · · · · : Return to first frame : Go back 10 frames : Advance 10 frames : Pause : Playback · : Play from In point to Out point · · · : Go back 1 frame : Advance 1 frame : Advance to last frame 4. After deciding on the frame, set the In point or Out point as shown below. · Right-click the time slider fig. clip02. eps Time slider · [Set in point] · [Set out point] Context menu A context menu appears, and you can then make the following settings. Using the In Point and Out Point Settings Icons fig. clip05. eps Out point In point · · · Sets the In point : Sets the Out point : Plays back from the In point to the Out point 69 Practical Use of the PR-50 Using the Optional DV-7DLC · · · : : Sets the In point : Sets the Out point Plays back from the In point to the Out point When you set the In point, the In point is then automatically assigned to each of the clip thumbnails. You can also right-click the time slider with the mouse and select [Set thumbnail frame] to assign the frame that appears at the preview cursor position to each of the clip thumbnails. 5. [. . . ] ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. [. . . ]