User manual EDIROL R-4

[. . . ] Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. [. . . ] To cancel repeat playback, press the [A-B REPEAT] button when points A and B have already been assigned. The [A-B REPEAT] button will go out, and repeat playback will be cancelled. * If, after assigning point A, you press the STOP button before assigning point B, point A will be cleared. * If the song plays all the way to the end after you've assigned point A, playback will repeat between point A and the end of the song. * If you press the [STOP] button during repeat playback, playback will stop and the repeat region (A-B) settings will be cleared. If there are numerous folders or projects within folders, you can use the Finder screen to select the project that you want to play. In this screen you can also perform operations such as deleting an unwanted project or copying a project to a CompactFlash card. Move the selected project to a different folder. With project playback stopped and the main screen (p. If the desired project is in a folder, the hard disk (HD), or the CompactFlash card (CF), you can press the [CURSOR] right button to move into the selected folder (i. If you want to move back to the upper-level folder, press the [CURSOR] left button. When the screen at right appears, use the [CURSOR] buttons to choose 1 Select. The project will be selected, and you will return to the main screen. Alternatively, with a project selected (step 2), you can press the [PLAY] button (instead of pressing the [ENTER] button) to play the selected project. You will return to the main screen when playback begins. * Since you cannot directly play back projects from the CompactFlash card, you won't be able to select them. You will have to copy the desired project to the R-4's internal hard disk before you can select it. In the Finder screen, use the [CURSOR] up/down buttons or the [SCRUB] dial to select the project you want to delete. If the desired project is in a folder, the hard disk (HD), or the CompactFlash card (CF), you can press the [CURSOR] right button to move into the selected folder (i. If you want to move back to the upper-level folder, press the [CURSOR] left button. * If you want to select the CompactFlash card, select the hard disk (HD) and then press the [CURSOR] right button; the contents of the CompactFlash card will appear. However, this will not be displayed if no CompactFlash card is inserted. [. . . ] 25) Make sure that the HOLD switch is turned off. If a folder contains a large number of files, operation will be sluggish when you open the Finder, and the screen will not scroll easily. If there is a large number of files, operations in the Finder will take more time. Try moving projects in the folder to a different folder so that the folder contains fewer projects. [. . . ]