User manual EDIROL V-440HD BROCHURE

[. . . ] The menu is displayed using the SD preview output. Parameters of Setup Menu HD/RGB Output HD/RGB Input HD/RGB PinP/Zoom HD/RGB Key HD/RGB Wipe Select SD Output SD Input SD PinP Set format of final output Setup input of HD/RGB section Set PinP parameter of HD/RGB section Set Key parameter of HD/RGB section Wipe setup of HD/RGB section Setup of SD PGM output Setup input of SD section Set PinP parameter of SD section SD Key SD Wipe Select Panel Preset Edit Multi Screen System MIDI Setup Factory Reset Set Key parameter of SD section Wipe setup of SD section Management of Panel Presets Setup of multi screen mode System setup of V-440HD Setup of MIDI parameters Reset parameters to Factory Preset HD/RGB IN Button On Screen Menu Display OUTPUT FORMAT Buttons Select output format via these buttons. Specific output format can also be selected via the setup menu. Output Formats NTSC 1080/60i 720/60p 480/60p 480/60i PAL 1080/50i 720/50p 576/50p 576/50i PANEL PRESETS Memorize and save up to 15 setups to allow instant, single button recall of any mixer configuration. [. . . ] The AUTO button transits between A-B in the duration specified on the TIME dial. The type of Transition is selectable from Cut, Dissolve (MIX) or wipe (6 patterns). Custom wipe parameters can be saved. Transitions Transit when video fader CUT Transit A-B with cut reaches center Mix images according MIX Transit with dissolve to fader position WIPE Transit with wipe (1-6) Wipe images according to fader position Up to 4 HD/RGB Inputs The HD/RGB section enables mixing and switching of up to 4 inputs from HD video devices (1080i or 720p, HD component) or RGB signals from computer (from VGA to SXGA). The HD/RGB section can be used as an independent mixer or can also take the result of the SD section as an up-converted HD/RGB source. Preview Output PGM Output PGM Output 1080i/720p/RGB Output Format Select SD Video Mixer Up Convert Ach Bch SD input Select Horizontal Open Cross TRANSITION buttons (HD/RGB) Preview Output As in the SD section, a variety of transition patterns can be applied with HD/RGB sources. Use SD and HD/RGB transitions simultaneously. Example of Wipe Background Image A Background Image B Wipe Patterns Horizontal Vertical Open HD/RGB Video Mixer Dch Cch HD/RGB Input Select Vertical Box Signal Flow SD1 SD2 SD3 SD4 HD1/ HD2/ HD3/ HD4/ RGB1 RGB2 RGB3 RGB4 Computer Image with Key HD/RGB Input Section Up to 4 source devices can be connected via BNC or 15-pin D-sub for direct connection of HD component or computer. For any input, the connectors not being used for the source input can be used as thru output. HD/RGB input parameters Format Auto Detect Input Format Pre Scaling Mode Manual Pre Scaling Scaling Type Manual X Scale Manual Y Scale X Position Y Position On/Off of Input Format Auto Detection Selection of input format On/Off of scaling the input image Manual scaling of the input image Input image method of scaling Adjust horizontal scaling Adjust vertical scaling Adjust position of horizontal starting point Adjust position of vertical starting point Brightness Contrast Saturation Red Green Blue Frequency Phase Adjust brightness of input image Adjust contrast of input image Adjust saturation of input image Adjust red level of input image Adjust green level of input image Adjust blue level of input image Micro adjust sampling frequency Micro adjust sampling phase SD Output Section Resultant mix within the SD section is output from the BNC terminal (composite) and S-Video terminal. The SD Preview Output also shows the On-Screen Menu. SD Input Section Up to 4 SD sources can be connected with BNC terminals (composite) or S-Video terminals. Source signals can be previewed via the Monitor Out BNC terminals. HD/RGB input parameters SD Input Select SD Brightness SD contrast SD Saturation SD Hue Select S-Video or Composite as priority SD input Adjust brightness of input image Adjust contrast of input image Adjust saturation of input image Adjust hue of input image HD/RGB Output Section This section contains BNC and D-Sub terminals to output the result of mixing within the HD/RGB section. Preview terminals of BNC and D-Sub are also equipped. MIDI and REMOTE terminals V-440HD is equipped with MIDI and REMOTE terminals for controlling from external devices. Video switching, synchronized with music or control from computer software is available with these terminals. NTSC/PAL switching, Test Patterns etc. Switch between NTSC and PAL modes by pressing button while turning on power. As test patterns, V-440HD can output a 75% color bar or 100% color bar. Other precise setup including brightness, color etc. [. . . ] Pick Hit winners are selected because of their positive impact on the everyday work of the intended user, their technological improvement over previous products, and their appropriateness in pricing. Get More of the Story Online www. edirol. com/v440hd 800. 380. 2580 Copyright 2007 Roland Corporation. All right reserved All specification and appearances are subject to change without notice June 2007 RSG U. S. Mix Multiple Input Formats Capable of mixing HD (1080i/720p:component), SD (S-Video, Composite) or RGB from computer (from VGA to SXGA). Choose from Various Output Formats Output format is selectable from various types: 1080i or 720p for HDTV and RGB for computer displays. [. . . ]