User manual EDIROL V-8

[. . . ] Owner's Manual Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. [. . . ] For details, refer to "Changing the Settings of the [BPM SYNC] Button" (p. · If you use BPM Sync or the [TRANSFORMER] buttons (p. 40) to switch images automatically, there will be situations in which the position of the video fader will not match the actual output. If you set the "Utility" menu item "Video Fader Mode" to "Quick, " the output will change to match the fader position when you move the video fader slightly (p. 78). 60 Switching Images in Synchronization with Music (BPM Sync) (continued) Switching Images at the Tempo Specified by the [TAP] Button Here's how to specify the BPM by pressing the [TAP] button at the desired interval, causing the image to switch at each beat. Introduction 1 Set the [MEMORY] knob to memory number 1. * The factory preset settings are assigned to memory number 1. For details on the [MEMORY] knob, refer to "Storing the Operating Panel Settings" (p. 28). Connections 2 3 Use the bus A and bus B INPUT SELECT buttons to select the desired input images. Input different images to bus A and bus B. Press the [BPM SYNC] button. Basic operation Switching images The [BPM SYNC] button will light, and the images will automatically switch at the BPM shown in the BPM display. The transition effect selected by the TRANSITION buttons will be applied when the images are switched. 4 Press the [TAP] button to specify the BPM. Effects BPM display The current BPM is shown in the BPM display. Input/output settings Repeatedly press the [TAP] button in time with the beat of the background music you're using. The BPM indication will change continuously according to the timing at which you press the [TAP] button. The image will switch according to the displayed BPM. * If you've selected "003: Fam" or "005: Nam" as the transition effect applied by a TRANSITION button, the FAM/ NAM cross point level (p. To check the BPM setting, set the "Utility" menu item "Preview Display Mode" to the "Mode3" setting, and note the settings data shown in the preview monitor (p. 26­27). BPM sync · When using BPM Sync, you can make the transition effect be a cut, or make the transition occur at a multiple of the displayed BPM interval. For details, refer to "Changing the Settings of the [BPM SYNC] Button" (p. · If you use BPM Sync or the [TRANSFORMER] buttons (p. 40) to switch images automatically, there will be situations in which the position of the video fader will not match the actual output. If you set the "Utility" menu item "Video Fader Mode" to "Quick, " the output will change to match the fader position when you move the video fader slightly (p. 78). External devices Video fader Appendices 61 Switching Images in Synchronization with Music (BPM Sync) (continued) Changing the Settings of the [BPM SYNC] Button When using BPM Sync to switch images, you can make the transition effect be a cut, or make the transition occur at a multiple of the displayed BPM interval. 1 Turn the [MEMORY] knob to select the memory number 2­8 that you want to edit. * Memory number 1 contains the factory preset settings (p. These settings cannot be modified. 2 Press the [MENU] button to access the menu, and choose "BPM SYNC. " Press the [MENU] button to access the menu. Use the [ ][ ] buttons to select "BPM SYNC. " Press the [ENTER] button to confirm your selection. 3 Specify the image switching mode. Use the [ ][ ] buttons to select "Mode, " and press [ENTER]. ] buttons to specify what will happen when images Use the [ ][ are switched. Value DirectA/B TransitionA/B Details Cut between the bus A and bus B images. Apply the transition effect selected by the TRANSITION buttons when switching between the bus A and bus B images. 4 Specify a multiple of the displayed BPM as the switching interval. Press the [MENU] button to return to the previous screen. [. . . ] TEL: (0)20 8747 5949 RUSSIA MuTek Dorozhnaya ul. 3, korp. 6 117 545 Moscow, RUSSIA TEL: (095) 981-4967 KOREA AVICS CO. , LTD. 463-3 Sunghwa bldg. 3rd F. , Seokyo-Dong, Mapo-ku, Seoul, KOREA Tel: 02-322-3264 NORWAY Roland Scandinavia Avd. Kontor Norge Lilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo NORWAY TEL: 2273 0074 Switching images SLOVAKIA DAN Acoustic s. r. o. SK - 940 01 Nové Zámky TEL: (035) 6424 330 TAIWAN ROLAND TAIWAN ENTERPRISE CO. , LTD. Room 5, 9fl. [. . . ]