User manual EDOBE XDOM TAKE 6 IR

[. . . ] General Security Note Attention: For carefree and safe use of this product, please read this manual and safety information carefully and follow the instructions. Technical manipulation of the product or any changes to the product are forbidden, due to security and approval issues. Please take care to set up the device correctly - consult your user guide. Children should use the device only under adult supervision. [. . . ] Please wait until your equipment reacts). When your equipment does react, press on the key -/-(13) to confirm. If you accidentally miss the code, you can stop the autosearch by pressing CHAN- (6) and by repeatedly pressing this key return to the right code. 3 Automatic code search for all brands When searching an unknown code, you can step through the library automatically (AutoSearch). When your equipment responds, you can stop the searching process and store the code you found. Note: as you can dedicate any appliance (TV, DVD, STB. ) to DVR, DVD, CD, STB, AUDIO or AUX key, you need first to enter any 4-digit code for the kind of appliance you wish to control (found in the code book), i. : If you want to program a STB under the DVR key, enter ANY STB code found in the code book and then follow the steps below: 1. Press and hold S (8) until the LED indicator (2) lights steadily. After a few seconds the remote starts stepping through the code library (fast search, 1 code per second). When the device responds, you can press CHAN+ (6) to switch to slow search (1 code per 3 seconds). You can step back by pressing CHAN- (6) (you can step forward by pressing CHAN+ (6) in case you went too far back). As soon as the device responds again, press the -/-- key (13) to store the code you found. Remark: if some functions of your equipment don't work, you need to try another code for your brand. The search function starts after the last confirmed code. For example, if it was 030, the search function starts at 031, and it will keep on trying until the last possible code. 4 Manual code search Note: as you can dedicate any appliance TV, DVR, DVD, STB, AUDIO, AUX, keys, you first need to enter any 4-digit code for the kind of appliance you wish to control (found in the code book), i. Under the AUX key, enter ANY STB code found in the code book and then follow the steps below: 1. Make sure your equipment is switched on. Press and hold S (8) until the LED indicator lights steadily. Press the mode key (4) that matches the equipment you want to control (for example TV). If you step past the correct code use CHAN- (6) to go back to the right code. [. . . ] As the TAKE10 features RF control, you can even control equipment which is out of sight - even through doors, walls and ceilings. If you have always wanted to distribute audio and video to a second room but have avoided doing so because of the cost and difficulties surrounding running cables, the easy answer has arrived. With this new product you avoid the interference from 2. 8 GHz Video Sender is designed to transmit audio and video signals without running any wires. [. . . ]