User manual EFD ULTRA TT BLUETOOTH KIT CONFIGURATION PROCEDURE

[. . . ] Insert the null modem connector into the COM port, then insert the Socket adapter into the null modem connector. Insert the Socket Installation CD into the computer's CD-ROM drive Use My Computer or Internet Explorer to access the CD-ROM drive. The Socket Configuration Utility will run in Internet Explorer. Follow the instructions for your device type and operating system. [. . . ] In the Main Menu, select Tools -> Bluetooth -> Discover. Wait about 15 seconds to list any wireless devices in range. Highlight the name or serial number entered when you configured the Socket Adapter in Section I, then tap "Connect. " 10. Enter 1234 as the passkey for the Socket Adapter. Verify that the "Add to trusted devices list" option is NOT selected, then tap "OK". 9 ® A NORDSON COMPANY Ultra TT Bluetooth® Configuration Procedure Important Notes Recharge the PDA and sync it to your computer at the end of every day. Otherwise, you might lose the information entered since the last sync session. The next time you want to connect to the Ultra TT using the same PDA, launch the EFD Ultra TT PDA Application. When asked if you wish to reconnect to the last device you communicated with, select "Yes" and go through the re-initialization steps. If you are using a new PDA or a different PDA from the one last used/paired with the Ultra TT, you must perform steps 7-10, Section 3 again to pair the new PDA with the Socket Adapter installed on the Ultra TT. If the PDA ever gets out of range of the Ultra TT (approximately 30 feet), Communications Error #1104 will occur. The Bluetooth connection will be re-established automatically when the PDA comes back within range. If the PDA powers down, it may be able to reconnect without restarting the Ultra TT and the EFD Ultra TT PDA Application by waiting 8-10 seconds. In this case, the Bluetooth Reconnect window will pop up and communication will be established. (If the Reconnect window does not pop up, restart the application by returning to PDA Home and relaunching the EFD Ultra TT PDA Application. ) 10 ® A NORDSON COMPANY Ultra TT Bluetooth® Configuration Procedure Appendix A EFD Ultra TT PDA Application Firmware Upgrade Overview This procedure describes how to upgrade the EFD Ultra TT PDA Application firmware on the Ultra TT using a PDA. Note that the PDA software must first be loaded onto a computer so that the firmware data file can be hot-synced (copied) to the PDA. You will also need the restoration diskette or mini CD that came with your Ultra TT to restore system parameters or "personalities" after the firmware update. If you are unable to locate your restoration disk or did not receive one with your Ultra TT system, please contact your local Ultra TT sales representative. NOTE After flashing the firmware, all dispensing programs will be erased from the TT! Be sure that all dispensing programs have been hot-synced and backed up on your computer prior to performing the firmware upgrade. After the upgrade, you will need to download your dispensing programs to the TT again using the PDA. Procedure Upgrade the firmware on the Ultra TT as follows: A. Copy the firmware file (. MOT) from the Ultra TT CD to the EFD sync folder (C:\Programs Files\Palm\<your PDA name>\EFD\Sync) on your computer. (If you do not have this folder on your computer, you must first install the EFD PDA software from the CD that came with your Ultra TT. ) 2. Copy the SNxxxxx. ACL recovery file from the Ultra TT mini-CD or diskette to the EFD sync folder. [. . . ] The socket adapter is configured to "Notify Local Host of Bluetooth Events". Reconfigure the Connections Property by checking the "Do not generate notifications" button. Refer to Section 1 (9) on page 5. Technical Support For further assistance, please contact EFD Customer Service at Email: automation@efd-inc. com USA: 800-556-3484 +1 401-434-1680 UK: 0800 585733 +44 (0) 1582 666334 15 A NORDSON COMPANY For EFD sales and service in over 30 countries, contact EFD or go to www. efd-inc. com/contact EFD, Inc. East Providence, RI USA 800-556-3484; +1-401-434-1680 (outside the USA) automation@efd-inc. com www. efd-inc. com/xyz EFD International Inc. [. . . ]