User manual EINHELL BG-HM 40

[. . . ] cAUTION: Read all safety regulations and instructions. Any failures made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. Before you operate this hand mower, thoroughly read through the following safety regulations as well as the operating instructions. [. . . ] Use the two screws M6x25 (19) and two hexagonal nuts M6 (20) for this purpose. 4: Screw push bar bottom section A (14), push bar bottom section B (15) and the two push bar extensions (13) together. Use six screws M6x30 (18) and hexagonal nuts M6 (20) for this purpose. 5: First attach one push bar bottom section to the mower, then press the push bar together slightly and attach the other side. Push the bar frame into the grass box tube. Snap the bottom fastening lug on the grass box over the bar frame. If you want your lawn to have a neat, trimmed look to it, however, you must consistently keep it cut down to a more manageable height. When starting the mowing session (and when mowing over freshly laid sod), it is advisable to set the cutting height relatively high, then gradually work your way down. For a well-groomed look, the cutting height should be set to approx. Grass blades grow thicker, faster, and are more resilient when their stems are consistently kept short (unless you live in very dry conditions and do not frequently water). Always mow the lawn when it is reasonable dry. In order to ensure that your lawn has a clean, even look to it when you're finished, mow in fairly straight paths at walking pace. The cutting swaths should always overlap each other by a few centimeters in order to avoid unsightly strips of grass. Clean the machine with a brush or rag after each use. Store the machine in a location that is dry and not accessible by children. ) are always tightened so that the machine can be safely operated at all times. replace excessively worn or damaged parts immediately. In order to ensure that you enjoy your scarifier for many years to come, all screwed parts, as well as the wheels and axles, should be cleaned and lubricated. Keeping your hand mower in good condition not only ensures a long lifespan and high performance, but also enables the machine to thoroughly cut your grass with minimal effort. The blade on the mower spindle is subject to more wear and tear than any other component of the unit. Check the condition of the blade on the mowing spindle at regular intervals and make sure that it is tightly fastened. The raw materials in this packaging can be reused or recycled. [. . . ] In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. Please keep your sales receipt in a safe place, as it is your proof of purchase. It would help us if you could describe the nature of the problem in as much detail as possible. [. . . ]