User manual EINHELL BT-VE 1100

[. . . ] Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes. To use the machine properly you must also observe the safety regulations, the assembly instructions and the operating instructions to be found in this manual. All persons who use and service the machine have to be acquainted with this manual and must be informed about the machines potential hazards. [. . . ] The various reducer adapters (8) slot inside each other so that it is possible to connect them to hoses of different diameters (Fig. 10, over the pleated filter (12) and fold the edge of the additional paper filter (11) around the pleated filter (12). Place the filters over the intake opening on the appliance head (3). Ensure that the filters are secured on the appliance head (3) (Fig. LpA sound pressure level Idle speed 80 dB(A) The quoted values are emission values and not necessarily reliable workplace values. Although there is a correlation between emission and immission levels it is impossible to draw any certain conclusions as to the need for additional precautions. Factors with a potential influence on the actual immission level at the workplace include the duration of impact, the type of room, and other sources of noise etc. The number of machines and other neighboring operations. Reliable workplace values may also vary from country to country. With this information the user should at least be able to make a better assessment of the dangers and risks involved. The machine has to be set up where it can stand securely. All covers and safety devices have to be properly fitted before the machine is switched on. Before you actuate the On/Off switch, make sure 10 Check whether the extractor hose (10) is tightly connected to the vacuum extraction system and to the extractor adaptor of the wood processing machine. The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Always pull out the mains power plug before starting any cleaning work. 1 Cleaning Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. We recommend that you clean the appliance immediately after you use it. 2 Cleaning the appliance head (3) Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents; these may be aggressive to the plastic parts in the appliance. [. . . ] In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies when an on-site service is used. In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. [. . . ]