User manual EINHELL DS 5-1

[. . . ] It is important to consult these instructions in order to acquaint yourself with the unit, its proper use and safety regulations. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well. The pressure sprayer is designed for spraying common home and garden products. [. . . ] Do not leave the unit (filled or empty) in direct sunlight. Before placing the unit in winter storage, thoroughly clean and dry it out so that it is not damaged by freezing temperatures. We will not be liable for any damage that results from improper repairs and/or improper handling of the unit (e. Using the unit in ways for which it was not intended). Opening the unit or performing maintenance work on it is only permitted when the tank is depressurized. To relieve the pressure, pull up the funnelshaped knob connected to the safety valve. Pump / carry handle Spray lance Release lever Tank Strap Safety pressure valve Integral filler neck Adjustable spray head Do not unscrew the overpressure valve (Figure 1/6) Check to ensure that the screw connections for the hose at the spray gun handle and on the tank are tight!Starting and filling the unit Before you unscrew the pump, raise the pressure valve (Fig. 1/6) and release any pressure that may be in the unit. Press down the pump handle as far it will go and slowly unscrew the pump (counterclockwise). Fill the tank up to a maximum of the 5 liter mark with the spray solution. follow the instructions provided by the spray product manufacturer. Insert the pump, press down the pump handle as far it will go and screw in the pump (clockwise) until it is tight again. the pump handle will engage in the bayonet lock. Note: The bayonet lock must be properly latched whenever you transport the pressure sprayer. also , the spray lance must be in the holder provided for it. Release the pump handle from the bayonet lock by turning it counter-clockwise slightly. Pressure is built up in the tank by pumping the pump handle (up and down). [. . . ] Lubricate the cleaned or new diaphragms with acid-free grease (for example Vaseline). Please quote the following data when ordering replacement parts: Type of machine Article number of the machine Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www. The product described in these instructions comes with a 2 year warranty covering defects. This 2-year warranty period begins with the passing of risk or when the customer receives the product. [. . . ]